{"title":"Airsmithing Essentials","description":"","products":[{"product_id":"zci-pinion-pull-press-tool","title":"ZCI Pinion Pull \u0026 Press Tool","description":"\u003cp\u003eThis tool can remove and install O-type pinion gears!\u003c\/p\u003e\n\u003cp\u003eInstalling a pinion gear that is too tight can damage the motor or tool, so it's crucial to install pinion gears carefully.\u003c\/p\u003e\n\u003cp\u003eSome pinion gears may need to be thermally expanded with a heat gun to ease installation. Lubricating oil is also recommended for installation.\u003c\/p\u003e\n\u003cp\u003eIf installation of the pinion gear remains difficult, it may be necessary to remove some material from the armature. This can be done by securely fastening the motor to a vice and running it at very low voltage with the motor tower and pinion gear removed. While the shaft is in motion, carefully apply sandpaper to remove material. It is crucial to remove material in small increments, as excessive removal can result in an overly loose pinion fit.\u003cbr\u003e\u003cbr\u003eFor tight-fitting O-shafts, Loctite 638 is the recommended adhesive. For D-type or looser fit pinions, JB weld may be required for best adhesion.\u003cbr\u003e\u003c\/p\u003e","brand":"ZCI","offers":[{"title":"Default Title","offer_id":41357516111965,"sku":"M-147","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/zcipiniontoolnewest.jpg?v=1701440065"},{"product_id":"steel-high-torque-0-05-1-27mm-hex-key-for-pinion-gears","title":"Steel High Torque 0.05\" (1.27mm) Hex Key for Pinion Gears","description":"\u003cp\u003eThis High Torque L-shaped Hex key is the perfect size for Pinion Gears! It's rigid and made in the USA.\u003c\/p\u003e\n\n\u003cp\u003eIf you are removing the Pinion screw which was held with adhesive, I recommend heating the Pinion with a heat gun prior to using the Hex key.\u003c\/p\u003e","brand":"BRILL ARMORY","offers":[{"title":"Default Title","offer_id":41357516800093,"sku":null,"price":0.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/hexkey.jpg?v=1701440083"},{"product_id":"super-lube-synthetic-grease-3oz","title":"Super Lube Synthetic Grease 3oz","description":"\u003cp\u003eSuper Lube Grease is a patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube is compatible with most other lubricants and will not run, drip, evaporate or form gummy deposits, and will not melt or separate.\u003c\/p\u003e\n\n\u003cp\u003eSuper Lube lubricants are well known and recommended in many different industries, and this 3oz tube is enough to lubricate a lot of gearboxes.\u003c\/p\u003e\n\n\u003cp\u003eHighly recommended for lubricating the following parts:\u003c\/p\u003e\n\n\u003cp\u003e- Gears\u003cbr\u003e\n- Gear axles\u003cbr\u003e\n- Tappet plate\u003cbr\u003e\n- Piston rails\u003cbr\u003e\n- Bushing holes\u003cbr\u003e\n- Anti-Reversal Latch\u003cbr\u003e\n- Gearbox shell rails\u003cbr\u003e\n- Pinion Gear\u003cbr\u003e\n- Spring \u0026amp; Spring Guide\u003cbr\u003e\n- Cut-Off lever\u003c\/p\u003e\n\n\u003cp\u003eSuper Lube Synthetic grease will not damage O-rings and other rubber seals. For lubricating rubber seals and other compression parts, I recommend using Super Lube Silicone Grease and Super Lube 100% Silicone Oil.\u003c\/p\u003e","brand":"Super Lube","offers":[{"title":"Default Title","offer_id":41357537411165,"sku":"21030","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/superlubesynthetic.jpg?v=1701440662"},{"product_id":"super-lube-silicone-lubricating-grease-3oz","title":"Super Lube Silicone Lubricating Grease 3oz","description":"\u003cp\u003eSilicone Lubricating Grease with Syncolon® (PTFE) has a wider operating range than petroleum based lubricants. It has excellent water protection and forms a moisture barrier. This ensures a great air seal and high performance from your compression parts.\u003c\/p\u003e\n\n\u003cp\u003eSuper Lube lubricants are well known and recommended in many different industries, and this 3oz tube is enough to lubricate a lot of gearboxes.\u003c\/p\u003e\n\n\u003cp\u003eRecommended for lubricating the following parts:\u003c\/p\u003e\n\n\u003cp\u003e- Cylinder Head Nozzle\u003cbr\u003e\n- Cylinder Head O-rings\u003cbr\u003e\n- Air Nozzle O-ring\u003cbr\u003e\n- Piston Head O-ring\u003cbr\u003e\n- Cylinder (thin coat)\u003c\/p\u003e\n\n\u003cp\u003eAlthough this Silicone lubricant is great for O-rings and rubber parts, you may get better performance and less friction from using Super Lube 100% silicone oil. However, this grease may require less frequent maintenance over 100% silicone oil.\u003c\/p\u003e","brand":"Super Lube","offers":[{"title":"Default Title","offer_id":41357537607773,"sku":"92003","price":14.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/superlubesilicongrease.jpg?v=1701440664"},{"product_id":"super-lube-silicone-oil-100-cst-4oz","title":"Super Lube Silicone Oil 100 cSt 4oz","description":"\u003cp\u003eThis is a pure Polydimethylsiloxane Silicone Oil for use in high speed compression components. This Silicone Oil has a very low viscosity which mitigates friction and enhances performance.\u003c\/p\u003e\n\n\u003cp\u003eRecommended for lubricating the following parts:\u003c\/p\u003e\n\n\u003cp\u003e- Piston Head O-rings\u003cbr\u003e\n- Air Nozzle O-rings\u003cbr\u003e\n- Buckings\u003cbr\u003e\n- GBB components and magazines\u003c\/p\u003e\n\n\u003cp\u003eIn addition to lubricating these parts, this oil can also help keep the inner barrel clean when used with swabs.\u003c\/p\u003e\n\n\u003cp\u003eAirsoft BB's have a thin wax-like coating that can accumulate in the barrel over time. This wax buildup can degrade performance and also corrode your barrel. Cleaning your barrel with a solvent and then finishing off with a tad of Super Lube Silicone Oil works great for preventing BB wax buildup in your barrel.\u003c\/p\u003e","brand":"Super Lube","offers":[{"title":"Default Title","offer_id":41357537706077,"sku":"56104","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/puresilicone_20oil.jpg?v=1701440666"},{"product_id":"elite-force-sl14-speed-loader","title":"Elite Force SL14 Speed Loader","description":"\u003cp\u003eThis Speed Loader has a clever and unique design that drastically reduces the time for loading M4 Midcaps.\u003c\/p\u003e \n\n\u003cp\u003eUp to 1800 BB's can be filled into the reservoir. The SL14 can load roughly 10 Midcaps or more depending on the Midcap capacity. Most Midcaps can be totally filled in just 3-4 pumps.\u003c\/p\u003e\n\n\u003cp\u003eThis is a great product for anybody who values their time! Elite Force is suggesting that inserts for different magazines will be available soon.\u003c\/p\u003e","brand":"Elite Force","offers":[{"title":"Default Title","offer_id":41357538525277,"sku":null,"price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/cfbbd1723680071269f0df97088bbc06.image.733x550.jpg?v=1701440689"},{"product_id":"maekiii-motor-alignment-checker-tool-for-v2-gearboxes","title":"Maekiii Motor Alignment Checker Tool for V2 Gearboxes","description":"\u003cp\u003eThis is a nifty 3D-printed motor alignment tool created by Maekiii. \u003cbr\u003e\u003cbr\u003eProper motor grip engagement is crucial in AEG's that use V2 Gearboxes, and unfortunately, some aftermarket grips do not give proper alignment. This tool shows the proper angle where the motor should be centered. \u003cbr\u003e\u003cbr\u003eOnce the user finds the correct motor angle, the motor alignment can be corrected. The tool is installed in the gearbox so that it aligns itself with the bevel gear's bushings and the motor's axle opening. \u003cbr\u003e\u003cbr\u003eAfter the grip is installed, the motor plate and adjustment screw are removed. The motor angle is correct if the shaft of the tool is centered in the adjustment screw hole. It's recommended to verify the reading by testing the tool with both sides.\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"384\" height=\"216\" src=\"https:\/\/www.youtube.com\/embed\/7ZZhTcKtmaM\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"384\" height=\"216\" src=\"https:\/\/www.youtube.com\/embed\/91svexQMcDI\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Maekiii","offers":[{"title":"Default Title","offer_id":41357545472093,"sku":"M-TOOL","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/maekimotor.jpg?v=1701440880"},{"product_id":"2-4mm-slotted-screwdriver-fits-chimera","title":"2.4mm Slotted Screwdriver (fits Chimera)","description":"\u003cp\u003eThis is a 2.4mm x 96mm slotted screwdriver.\u003c\/p\u003e\n\n\u003cp\u003eIt fits snugly in Chimera screw terminals to ease installation and to prevent your screws from stripping!\u003c\/p\u003e","brand":"BRILL ARMORY","offers":[{"title":"Default Title","offer_id":41357552320605,"sku":"SD-C","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/screwdriverswag.jpg?v=1701441134"},{"product_id":"elite-force-ak47-magazine-adapter-for-sl14-speed-loader","title":"Elite Force AK47 Magazine Adapter for SL14 Speed Loader","description":"\u003cp\u003eNow you can use the SL14 with AK47 magazines! This adapter is confirmed to work with Ares, G\u0026amp;G and Echo 1 AK47 magazines. Fitment and function with other brands or types of magazines is not guaranteed.\u003c\/p\u003e","brand":"Elite Force","offers":[{"title":"Default Title","offer_id":41357558186077,"sku":"2211080","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/efmagadapterakbrill.jpg?v=1701441229"},{"product_id":"eagle6-airsoft-lipo-mod-cover-block-for-m4-hk416-417-tm-ngrs","title":"Eagle6 Airsoft  - Lipo Mod Cover Block For M4\/HK416\/417 TM NGRS","description":"\u003cp\u003eWhen you remove the proprietary stock contacts on M4 next gen, the stock bars are able to slide out.  This small cover block can be screwed down over the bars, thus holding them tightly in place.  This is used for doing deans conversions to the proprietary stock bars to retain the neat original bar solution but allow you to fit any battery and the convenience of a deans connection.\u003c\/p\u003e","brand":"Eagle6 Airsoft","offers":[{"title":"Default Title","offer_id":41357600784477,"sku":"E6-PT-0001","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/eagle6lipomod.jpg?v=1701442303"},{"product_id":"laylax-wrench-for-tm-ngrs-m4","title":"LayLax Wrench for TM NGRS M4","description":"\u003cp\u003eConvenient compact design. This wrench can be used for both the outer barrel fixed ring and stock fixed ring for easy loosening and tightening.\u003c\/p\u003e","brand":"Laylax","offers":[{"title":"Default Title","offer_id":41357607862365,"sku":"4560282768495","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/m4renti.jpg?v=1701442543"},{"product_id":"fps-high-performance-lubricant-set-for-aeg-mechanical-parts-and-o-rings","title":"FPS High-performance Lubricant Set for AEG mechanical parts and O-rings","description":"\u003cp\u003eThis set consists of:\u003c\/p\u003e\n\u003cp\u003e1) High performance grease based on complex calcium sulfonate soaps, specially designed for gears and bushings (GR01, brownish grease).\u003c\/p\u003e\n\u003cp\u003e- Excellent lubrication at high rotation speeds\u003cbr\u003e - Resistance to large workloads\u003cbr\u003e - Corrosion protection of treated surfaces\u003cbr\u003e - Excellent resistance to water\u003cbr\u003e - Very fast response time to sudden mechanical stress\u003c\/p\u003e\n\u003cp\u003e2) High performance lubricant with high concentration pure PTFE for O-rings and sealing (GR02, greenish grease).\u003c\/p\u003e\n\u003cp\u003e- Very low coefficient of friction between metal and rubber \u003cbr\u003e - Adhesion to treated surfaces to ensure lasting protection over time \u003cbr\u003e - Chemical inertia with almost all commercial elastomers (not with EPDM) \u003cbr\u003e - High resistance to drip \u003cbr\u003e - Very fast response to sudden mechanical stress\u003c\/p\u003e\n\u003cp\u003e100% MADE IN ITALY\u003c\/p\u003e","brand":"FPS Softair","offers":[{"title":"Default Title","offer_id":41357616021597,"sku":"GR03","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/gr03fps.png?v=1701442845"},{"product_id":"slong-silicone-oil-1000cs-30ml","title":"Slong Silicone Oil, 1000cs, 30ml","description":"\u003cp\u003eSlong silicone oil for O-rings and seals.\u003c\/p\u003e\n\n\u003cp\u003e- Colorless, odorless and non-volatile liquid\u003cbr\u003e\n- Low surface tension \u003cbr\u003e\n- Good heat and cold resistance\u003cbr\u003e\n- Prolong rubber’s life\u003cbr\u003e\n- Softens objects and avoid cracking\u003c\/p\u003e","brand":"Slong","offers":[{"title":"Default Title","offer_id":41357619560541,"sku":"SL00603","price":6.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7083.jpg?v=1701442984"},{"product_id":"pts-mega-arms-mkm-handguard-removal-tool","title":"PTS Mega Arms MKM Handguard Removal Tool","description":"\u003cp\u003eDisclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.\u003c\/p\u003e","brand":"Professional Training Simulation","offers":[{"title":"Default Title","offer_id":41357621493853,"sku":"MG006490300","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/PTS_Barrel_Nut_Key_03_P__91936.1415348585.1280.1280__02211.jpg?v=1701443085"},{"product_id":"fps-high-performance-lubricant-for-tune-up-kit-o-rings-and-seals-gr02","title":"FPS High performance lubricant for tune-up kit (O-rings and seals, GR02)","description":"\u003cp\u003eHigh performance lubricant whith high concentration pure PTFE (GR02).\u003cbr\u003e\nProduct added to ensure:\u003c\/p\u003e \n\n\u003cp\u003e- Very low coefficient of friction between metal and rubber\u003cbr\u003e\n- Adhesion to treated surfaces to ensure lasting protection over time\u003cbr\u003e\n- Chemical inertia with almost all commercial elastomers (not with EPDM)\u003cbr\u003e\n- High resistance to drip\u003cbr\u003e\n- Very fast response to sudden mechanical stress\u003c\/p\u003e\n\n\u003cp\u003e100% MADE IN ITALY\u003c\/p\u003e","brand":"FPS Softair","offers":[{"title":"Default Title","offer_id":41357621788765,"sku":"GR02","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/gr02png.jpg?v=1701443101"},{"product_id":"fps-high-performance-lubricant-for-gears-and-bushings-gr01","title":"FPS High performance lubricant for gears and bushings (GR01)","description":"\u003cp\u003eHigh performance grease based on complex calcium sulfonate soaps, specially designed for gears and bushings (GR01).\u003c\/p\u003e\n\n\u003cp\u003eProduct added to ensure:\u003c\/p\u003e \n\n\u003cp\u003e- Excellent lubrication at high rotation speeds\u003cbr\u003e\n- Resistance to large workloads\u003cbr\u003e\n- Corrosion protection of treated surfaces\u003cbr\u003e\n- Excellent resistance to water\u003cbr\u003e\n- Very fast response time to sudden mechanical stress\u003c\/p\u003e\n\n\u003cp\u003e100% MADE IN ITALY\u003c\/p\u003e","brand":"FPS Softair","offers":[{"title":"Default Title","offer_id":41357621821533,"sku":"GR01","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/gr01.jpg?v=1701443103"},{"product_id":"laylax-pin-opener-for-large-connector","title":"Laylax Pin Opener for Large Connector","description":"\u003cp\u003eTool for servicing large Tamiya-style connectors.\u003c\/p\u003e","brand":"Laylax","offers":[{"title":"Default Title","offer_id":41357622640733,"sku":"4582109580158","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/4582109580700158.jpg?v=1701443150"},{"product_id":"acetech-ac5000-airsoft-chronograph","title":"Acetech AC5000 Airsoft Chronograph","description":"\u003cp\u003eA device for measuring power output and rate of fire for Airsoft replicas. Small and lightweight.\u003c\/p\u003e\n\n\u003cp\u003eManufacturer provided stats:\u003c\/p\u003e\n\n\u003cp\u003e- Measures Muzzle Velocity from 30 m\/s ~ 400 m\/s (90 ft\/s ~ 1200 ft\/s)\u003cbr\u003e\n- Ammo parameter setting supports 5 memory slots\u003cbr\u003e\n- Ammo parameter setting from Weight: 0.01g ~ 9.99g Caliber 4.5mm ~ 18mm\u003cbr\u003e\n- 25 memory slots for velocity and ROF (Rate of fire)\u003cbr\u003e\n- Idling and low battery auto power off function.\u003cbr\u003e\n- FCC, CE, RoHS compliant\u003cbr\u003e\n- Tripod Ready mounting hole (Screw for standard camera \/ camcorder tripods )\u003cbr\u003e\n- Support Micro-USB(5V\/0.5A) power input(no battery charge function)\u003cbr\u003e\n- ROF range: 100~5000RPM\u003cbr\u003e\n- Extra large caliber (diameter 24mm)\u003cbr\u003e\n- Weight: 200g without battery\u003cbr\u003e\n- Size : L x W x H = 117 x 97 x 59 (mm)\u003c\/p\u003e","brand":"ACETECH","offers":[{"title":"Default Title","offer_id":41357623722077,"sku":"PAC5000-B-001","price":52.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/PAC5000-B-001-01.jpg?v=1701443216"},{"product_id":"springtek-aeg-spring-analyzer","title":"SpringTek AEG Spring Analyzer","description":"\u003cp\u003eThe SpringTek is a tool for measuring spring strength without ever having to test the spring inside of a gearbox. This eliminates guesswork, saves time, and allows technicians to easily organize random springs that may be laying around.\u003c\/p\u003e\n\n\u003cp\u003eFor accurate measuring, the SpringTek should be mounted to a non-moving surface.\u003c\/p\u003e \n\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\n\u003cp\u003e1x Spring Tube\u003cbr\u003e\n1x Compression Rod\u003cbr\u003e\n1x Electronic Scale\u003cbr\u003e\n4x #8 3\/4\" Wood Screws\u003cbr\u003e\n1x Instruction Manual and reference chart\u003c\/p\u003e","brand":"Spring-Tek","offers":[{"title":"Default Title","offer_id":41357623918685,"sku":"SPRINGTEK","price":52.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7395-2.jpg?v=1701443235"},{"product_id":"atlas-custom-works-pinion-pull-press-tool","title":"Atlas Custom Works Pinion Pull \u0026 Press Tool","description":"\u003cp\u003eThis tool can remove and install O-type pinion gears. Has a thin shaft which makes removing even some D-types possible.\u003c\/p\u003e\n\n\u003cp\u003eInstalling a pinion gear that is too tight can damage the motor or tool, so it's crucial to install pinion gears carefully.\u003c\/p\u003e\n\n\u003cp\u003eSome pinion gears may need to be thermally expanded with a heat gun to ease installation. Lubricating oil is also recommended for installation.\u003c\/p\u003e\n\n\u003cp\u003eIf installation of the pinion gear remains difficult, it may be necessary to remove some material from the armature. This can be done by securely fastening the motor to a vice and running it at very low voltage with the motor tower and pinion gear removed. While the shaft is in motion, carefully apply sandpaper to remove material. It is crucial to remove material in small increments, as excessive removal can result in an overly loose pinion fit.\u003c\/p\u003e","brand":"Atlas Custom Works","offers":[{"title":"Default Title","offer_id":41357624639581,"sku":"EX121","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/EX121_5.jpg?v=1701443290"},{"product_id":"retro-arms-bushing-installation-tool","title":"Retro ARMS Bushing Installation Tool","description":"\u003cp\u003eThis is a bushing installation tool. It is made of steel and is designed to allow easier hammering of bushings into a tight-fitting gearbox shell.\u003c\/p\u003e\n\n\u003cp\u003eNote: Use only gentle taps when pressing the bushings into a gearbox shell, as excessive force can warp or damage the shell. If extreme force is required for bushings to fit, then the bushings are likely not compatible with the shell.\u003c\/p\u003e","brand":"Retro ARMS","offers":[{"title":"Default Title","offer_id":41361937662045,"sku":"RETRO-7208","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/retroarms-natloukatko-lozisek.jpg?v=1701681657"},{"product_id":"epes-airsoft-ar15-wrench-tool-hx-pink","title":"EPeS Airsoft AR15 Wrench Tool HX - Pink","description":"Armorer’s wrench for AR15-type weapons. High visibility and probably less likely to get stolen due to the pink color!\u003cbr\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41659482898525,"sku":"E401-PIN","price":21.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e056-pi-1.jpg?v=1709877948"},{"product_id":"epes-airsoft-liquid-thread-locker-sealant-1-ml-low-strength","title":"EPeS Airsoft Liquid Thread Locker \/ Sealant (1 ml, low strength)","description":"\u003cspan class=\"s1-buttonRow-txt\"\u003eThread locking glue in 1ml syringe.\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis thread locking glue can also be used as a joint filler for gaps up to 0,13 mm wide\u003cbr data-mce-fragment=\"1\"\u003eGlued bond stays strong in temperatures up to 150 °C. Heat up the bond to loosen it, for example with a hot air gun\u003cbr data-mce-fragment=\"1\"\u003eThe package contains 1 ml of the thread locking glue in selected strength\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRecommended for following uses:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFixation of the piston head screws (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the cylinder head grub screws (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eSealing of the HPA threaded connections (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the gearbox bearings against sliding (H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the motor's pressure screw (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the interrupter screws or switching contacts (L)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41659487453277,"sku":"E431-L","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e043-l-1.jpg?v=1709879258"},{"product_id":"epes-airsoft-liquid-thread-locker-sealant-1-ml-medium-strength","title":"EPeS Airsoft Liquid Thread Locker \/ Sealant (1 ml, medium strength)","description":"\u003cspan class=\"s1-buttonRow-txt\"\u003eThread locking glue in 1ml syringe.\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis thread locking glue can also be used as a joint filler for gaps up to 0,13 mm wide\u003cbr data-mce-fragment=\"1\"\u003eGlued bond stays strong in temperatures up to 150 °C. Heat up the bond to loosen it, for example with a hot air gun\u003cbr data-mce-fragment=\"1\"\u003eThe package contains 1 ml of the thread locking glue in selected strength\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRecommended for following uses:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFixation of the piston head screws (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the cylinder head grub screws (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eSealing of the HPA threaded connections (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the gearbox bearings against sliding (H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the motor's pressure screw (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the interrupter screws or switching contacts (L)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41659487486045,"sku":"E431-M","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e043-m-1.jpg?v=1709879295"},{"product_id":"epes-airsoft-liquid-thread-locker-sealant-1-ml-high-strength","title":"EPeS Airsoft Liquid Thread Locker \/ Sealant (1 ml, high strength)","description":"\u003cspan class=\"s1-buttonRow-txt\"\u003eThread locking glue in 1ml syringe.\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis thread locking glue can also be used as a joint filler for gaps up to 0,13 mm wide\u003cbr data-mce-fragment=\"1\"\u003eGlued bond stays strong in temperatures up to 150 °C. Heat up the bond to loosen it, for example with a hot air gun\u003cbr data-mce-fragment=\"1\"\u003eThe package contains 1 ml of the thread locking glue in selected strength\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRecommended for following uses:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFixation of the piston head screws (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the cylinder head grub screws (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eSealing of the HPA threaded connections (M\/H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the gearbox bearings against sliding (H)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the motor's pressure screw (L\/M)\u003cbr data-mce-fragment=\"1\"\u003eFixation of the interrupter screws or switching contacts (L)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41659487617117,"sku":"E431-H","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e043-h-1.jpg?v=1709879322"},{"product_id":"epes-airsoft-1mm-ptfe-tape","title":"EPeS Airsoft .1mm PTFE Tape","description":"PTFE tape for sealing buckings, cylinder heads, etc. .1mm thick. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41685189886045,"sku":"E441-100","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e441-100-1.jpg?v=1710478926"},{"product_id":"epes-airsoft-076mm-ptfe-tape","title":"EPeS Airsoft .076mm PTFE Tape","description":"PTFE tape for sealing buckings, cylinder heads, etc. .076mm thick. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41685190836317,"sku":"E441-076","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e441-076-1.jpg?v=1710478981"},{"product_id":"epes-airsoft-ptfe-grease-5-ml","title":"EPeS Airsoft PTFE Grease (5 ml)","description":"\u003cdiv class=\"detailShort clear s1-blockSmaller\" data-mce-fragment=\"1\"\u003ePTFE grease for gears and other mechanical parts. Comes with brush which allows for perfect application and reduces wasted grease.\u003cbr\u003e\n\u003c\/div\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41685203419229,"sku":"E451-5","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e451-5-3.jpg?v=1710479547"},{"product_id":"epes-airsoft-silicone-grease-5-ml","title":"EPeS Airsoft Silicone Grease (5 ml)","description":"\u003cdiv class=\"detailShort clear s1-blockSmaller\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"detailShort clear s1-blockSmaller\" data-mce-fragment=\"1\"\u003eSilicone grease for rubber and other sealing materials. Comes with brush which allows for perfect application and reduces wasted grease.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"EPeS Airsoft","offers":[{"title":"Default Title","offer_id":41685204172893,"sku":"E452-5","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/e452-5-3.jpg?v=1710479682"},{"product_id":"adhesive-test-product","title":"Brill Armory \/ BSI IC-Loc - Red High Strength Thread Locker - 10ml","description":"\u003cp\u003eBrill Armory recommends this permanent Thread Locker for screws subject to high vibration and stress, where disassembly is not needed. This is a great thread lock for sector gears which use screws.\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e-Threads of fasteners\u003cbr\u003e-Threads that need permanent bond\u003cbr\u003e\u003cbr\u003eDirections: Shake well and then apply IC-LOC™ Red to the clean and dry threaded areas before assembling non- plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™Red is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Red permanently prevents the loosening of threaded fasteners from shock and vibration, while sealing and preventing the rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by heating them to 490°F (254°C). Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_red.html\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42127815639133,"sku":"BSI-173","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7945.jpg?v=1715109661"},{"product_id":"brill-armory-bsi-ic-loc-blue-medium-strength-thread-locker-10ml","title":"Brill Armory \/ BSI IC-Loc - Blue Medium Strength Thread Locker - 10ml","description":"\u003cp\u003eBrill Armory recommends this removable Thread Locker for medium-sized screws subject to moderate vibration and stress, where disassembly may be necessary.\u003cbr\u003e\u003cbr\u003eExamples: Piston head screw, gearbox screws\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Threads of fasteners\u003cbr\u003e\u003cbr\u003e- Bolts\u003c\/p\u003e\n\u003cp\u003e- Screws\u003c\/p\u003e\n\u003cp\u003e- Nuts\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirections: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_blue.html\" target=\"_blank\" rel=\"noopener\"\u003esafety information\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42129834836061,"sku":"BSI-171","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7946.jpg?v=1715109679"},{"product_id":"brill-armory-bsi-ic-loc-purple-low-strength-thread-locker-10ml","title":"Brill Armory \/ BSI IC-Loc - Purple Low Strength Thread Locker - 10ml","description":"\u003cp\u003eBrill Armory recommends this removable Thread Locker for small screws subject to moderate vibration and stress, or larger screws where disassembly may be more frequent.\u003cbr\u003e\u003cbr\u003eExamples: Gearbox screws, misc small screws, ETU\/MOSFET retaining screw.\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Threads of fasteners\u003cbr\u003e\u003cbr\u003e- Bolts\u003c\/p\u003e\n\u003cp\u003e- Screws\u003c\/p\u003e\n\u003cp\u003e- Nuts\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirections: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Purple to clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Purple is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. Cured temperature range is -60° to +300°F (-51° to +149°C). May attack some plastics. Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca rel=\"noopener\" href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_purple.html\" target=\"_blank\" data-mce-href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_red.html\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42129863835741,"sku":"BSI-177","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7947.jpg?v=1715109687"},{"product_id":"brill-armory-bsi-ic-loc-green-wicking-thread-locker-10ml","title":"Brill Armory \/ BSI IC-Loc - Green Wicking Thread Locker - 10ml","description":"\u003cp\u003eBrill Armory recommends this medium\/high strength Thread Locker for already fastened screws subject to moderate vibration and stress. \u003cbr\u003e\u003cbr\u003eA great use of this Thread Locker is for the motor height adjustment screw. With this product, there is no need to disassemble the screw to apply adhesive. Just set the motor height as normal and add IC-Loc Green to the screw.\u003cbr\u003e\u003cbr\u003eIf you plan on changing the motor, it's advised to use a lower strength adhesive, as this one is considered semi-permanent.\u003cbr\u003e\u003cbr\u003eTo loosen the bond, heat must be applied. Failure to apply heat before disassembly can cause damage.\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC Green™ wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Threads of fasteners\u003cbr\u003e\u003cbr\u003e- Bolts\u003c\/p\u003e\n\u003cp\u003e- Screws\u003c\/p\u003e\n\u003cp\u003e- Nuts\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirections: Shake well and then apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: MAY CAUSE ALLERGIC SKIN REACTION, EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca rel=\"noopener\" href=\"https:\/\/bsi-inc.com\/hobby\/ic_loc_green.html\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42129949589597,"sku":"BSI-175","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7953.jpg?v=1715109696"},{"product_id":"brill-armory-bsi-ic-loc-green-wicking-thread-locker-50ml","title":"Brill Armory \/ BSI IC-Loc - Green Wicking Thread Locker - 50ml","description":"\u003cp\u003eBrill Armory recommends this medium\/high strength Thread Locker for already fastened screws subject to moderate vibration and stress. \u003cbr\u003e\u003cbr\u003eA great use of this Thread Locker is for the motor height adjustment screw. With this product, there is no need to disassemble the screw to apply adhesive. Just set the motor height as normal and add IC-Loc Green to the screw.\u003cbr\u003e\u003cbr\u003eIf you plan on changing the motor, it's advised to use a lower strength adhesive, as this one is considered semi-permanent.\u003cbr\u003e\u003cbr\u003eTo loosen the bond, heat must be applied. Failure to apply heat before disassembly can cause damage.\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC Green™ wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Threads of fasteners\u003cbr\u003e\u003cbr\u003e- Bolts\u003c\/p\u003e\n\u003cp\u003e- Screws\u003c\/p\u003e\n\u003cp\u003e- Nuts\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirections: Shake well and then apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: MAY CAUSE ALLERGIC SKIN REACTION, EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/ic_loc_green.html\" rel=\"noopener\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42131768705117,"sku":"BSI-176","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7959.jpg?v=1715109702"},{"product_id":"brill-armory-bsi-ic-2000-rubber-toughened-ca-glue-1-oz","title":"Brill Armory \/ BSI IC-2000 Rubber Toughened CA Glue 1oz","description":"\u003cp\u003eRegular CA glues can crack and shatter, leaving residue in the gearbox. Brill Armory recommends this rubber-toughened CA glue for piston racks, as it is reinforced and shock resistant. The setup time of 20-40 seconds is also longer than instant CA adhesives, giving the technician more time to fully tap the rack back in.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R\/C car tires.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Best On:\u003c\/p\u003e\n\u003cp\u003e- Glass \u0026amp; Metal\u003cbr\u003e- Fiberglass\u003cbr\u003e- Hard Plastics\u003cbr\u003e- Rubber\u003cbr\u003e- Reinforcing\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e- Balsa Wood\u003cbr\u003e- Soft Wood\u003cbr\u003e- Hard Wood\u003cbr\u003e- Ceramics\u003cbr\u003e- Laminating\u003cbr\u003e- Water-Resistant\u003cbr\u003e\u003cbr\u003eDirections:\u003cbr\u003e\u003cbr\u003eScrew on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: BONDS SKIN IN SECONDS, EYE AND RESPIRATORY IRRITANT\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/ic_2000.html\" rel=\"noopener\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42131788398685,"sku":"BSI-118","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7950_2.jpg?v=1715109707"},{"product_id":"brill-armory-bsi-ic-2000-rubber-toughened-ca-glue-1-2oz","title":"Brill Armory \/ BSI IC-2000 Rubber Toughened CA Glue 1\/2oz","description":"\u003cp\u003eRegular CA glues can crack and shatter, leaving residue in the gearbox. Brill Armory recommends this rubber-toughened CA glue for piston racks, as it is reinforced and shock resistant. The setup time of 20-40 seconds is also longer than instant CA adhesives, giving the technician more time to fully tap the rack back in.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R\/C car tires.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Best On:\u003c\/p\u003e\n\u003cp\u003e- Glass \u0026amp; Metal\u003cbr\u003e- Fiberglass\u003cbr\u003e- Hard Plastics\u003cbr\u003e- Rubber\u003cbr\u003e- Reinforcing\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e- Balsa Wood\u003cbr\u003e- Soft Wood\u003cbr\u003e- Hard Wood\u003cbr\u003e- Ceramics\u003cbr\u003e- Laminating\u003cbr\u003e- Water-Resistant\u003cbr\u003e\u003cbr\u003eDirections:\u003cbr\u003e\u003cbr\u003eScrew on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: BONDS SKIN IN SECONDS, EYE AND RESPIRATORY IRRITANT\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/ic_2000.html\" rel=\"noopener\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42131815137373,"sku":"BSI-117","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7955_1.jpg?v=1715109712"},{"product_id":"brill-armory-bsi-ic-loc-blue-medium-strength-thread-locker-50ml","title":"Brill Armory \/ BSI IC-Loc - Blue Medium Strength Thread Locker - 50ml","description":"\u003cp\u003eBrill Armory recommends this removable Thread Locker for medium-sized screws subject to moderate vibration and stress, where disassembly may be necessary.\u003cbr\u003e\u003cbr\u003eExamples: Piston head screw, gearbox screws\u003cbr\u003e\u003cbr\u003eManufacturer description: \u003cbr\u003e\u003cbr\u003eIC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Threads of fasteners\u003cbr\u003e\u003cbr\u003e- Bolts\u003c\/p\u003e\n\u003cp\u003e- Screws\u003c\/p\u003e\n\u003cp\u003e- Nuts\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirections: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: EYE AND SKIN IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca rel=\"noopener\" href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_blue.html\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42131837583453,"sku":"BSI-172","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7960.jpg?v=1715109716"},{"product_id":"brill-armory-bsi-insta-cure-super-thin-ca-glue-1-2oz","title":"Brill Armory \/ BSI INSTA-CURE Super Thin CA Glue 1\/2oz","description":"\u003cp\u003eInsta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Best On:\u003c\/p\u003e\n\u003cp\u003e    Balsa Wood\u003cbr\u003e    Ceramics\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e    Soft Wood\u003cbr\u003e    Fiberglass\u003cbr\u003e    Hard Plastics\u003cbr\u003e    Water-Resistant\u003cbr\u003e    CA Hinges\u003cbr\u003e\u003cbr\u003eDirections: Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: BONDS SKIN INSTANTLY. EYE \u0026amp; RESPIRATORY IRRITANT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca rel=\"noopener\" href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_red.html\" data-mce-href=\"https:\/\/www.bsi-inc.com\/hobby\/ic_loc_red.html\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42135469457501,"sku":"BSI-101","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7948.jpg?v=1715109723"},{"product_id":"brill-armory-bsi-slow-cure-epoxy-4-5-oz","title":"Brill Armory \/ BSI SLOW-CURE Epoxy 4.5 oz","description":"\u003cp\u003eSLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Best On:\u003c\/p\u003e\n\u003cp\u003e    Glass \u0026amp; Metal\u003cbr\u003e    White Foam\u003cbr\u003e    Water-Resistant\u003cbr\u003e    Reinforcing\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e    Balsa Wood\u003cbr\u003e    Soft Wood\u003cbr\u003e    Hard Wood\u003cbr\u003e    Fiberglass\u003cbr\u003e    Hard Plastics\u003cbr\u003e    Laminating\u003cbr\u003e\u003cbr\u003eDirections:  \u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.\u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ has the highest strength of our epoxies and should be applied in temperatures above 70°F. SLOW-CURE™ maintains it’s strength in both the lowest and highest temperature ranges of our line of epoxies.\u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE™ works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency. SLOW-CURE™ is waterproof and forms superior bonds if you’re willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: IRRITANT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/slow_cure.html\" target=\"_blank\" rel=\"noopener\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42135545413725,"sku":"BSI-205","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7952.jpg?v=1715109728"},{"product_id":"brill-armory-bsi-mid-cure-epoxy-4-5-oz-copy","title":"Brill Armory \/ BSI MID-CURE Epoxy 4.5 oz","description":"\u003cp\u003eMID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Best On:\u003c\/p\u003e\n\u003cp\u003e    Hard Wood\u003cbr\u003e    Fiberglass\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e    Balsa Wood\u003cbr\u003e    Soft Wood\u003cbr\u003e    Glass \u0026amp; Metal\u003cbr\u003e    Hard Plastics\u003cbr\u003e    Rubber\u003cbr\u003e    White Foam\u003cbr\u003e    Laminating\u003cbr\u003e    Water-Resistant\u003cbr\u003e    Reinforcing\u003c\/p\u003e\n\u003cp\u003eDirections:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMID-CURE™ 15 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.\u003c\/p\u003e\n\u003cp\u003eMID-CURE™ should be applied in temperatures above 65˚F. It can be used in most applications when you need more working time than QUIK-CURE™ provides. MID-CURE™ can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.\u003c\/p\u003e\n\u003cp\u003eMID-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. MID-CURE™ is our most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. MID-CURE’S™ lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. MID-CURE™ is a water-resistant substitute for QUIK-CURE™. Full cure in 2-3 hours. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: IRRITANT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/mid_cure.html\" target=\"_blank\" rel=\"noopener\"\u003esafety information\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/bsi-inc.com\/hobby\/slow_cure.html\" target=\"_blank\"\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42135561699421,"sku":"BSI-203","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7964.jpg?v=1715109732"},{"product_id":"brill-armory-bsi-quik-cure-epoxy-4-5-oz","title":"Brill Armory \/ BSI QUIK-CURE Epoxy 4.5 oz","description":"\u003cp\u003eQUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"tab-sample2\" class=\"tab_content\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"six columns\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorks Best On:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003eHard Wood\u003c\/li\u003e\n\u003cli\u003eGlass \u0026amp; Metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"six columns\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorks Good On:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003eBalsa Wood\u003c\/li\u003e\n\u003cli\u003eSoft Wood\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eCeramics\u003c\/li\u003e\n\u003cli\u003eHard Plastics\u003c\/li\u003e\n\u003cli\u003eWhite Foam\u003c\/li\u003e\n\u003cli\u003eReinforcing\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eDirections:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"tab-sample3\" class=\"tab_content\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"twelve columns\"\u003e\n\u003cp\u003eQUIK-CURE™ 5 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.\u003c\/p\u003e\n\u003cp\u003eQUIK-CURE™ is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40˚F. Temperatures above 90˚F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.\u003c\/p\u003e\n\u003cp\u003eQUIK-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. QUIK-CURE’S™ lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUIK-CURE™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: IRRITANT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hobby\/quik_cure.html\" target=\"_blank\" rel=\"noopener\"\u003esafety information\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/bsi-inc.com\/hobby\/mid_cure.html\" target=\"_blank\"\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42135565926493,"sku":"BSI-201","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7965.jpg?v=1715109539"},{"product_id":"brill-armory-bsi","title":"Brill Armory \/ BSI INSTA-CLEAN Ultimate Sticker Residue Remover 2fl. oz","description":"\u003cdiv id=\"tab-sample1\" class=\"tab_content\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"twelve columns\"\u003e\n\u003cp\u003eWorks on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and their adhesive residue. INSTA-CLEAN™ will also remove scuff marks that regular household cleaners won't touch.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWorks Good On:\u003c\/p\u003e\n\u003cp\u003e    Stickers\u003cbr\u003e    Sticker Residue\u003cbr\u003e    Residue on Glass\u003cbr\u003e    Residue on Fiberglass\u003cbr\u003e\u003cbr\u003eDirections:\u003cbr\u003e\u003cbr\u003eSpray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWARNING: EYE IRRITANT, COMBUSTIBLE LIQUID\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hardware\/insta_clean.html\" rel=\"noopener\" target=\"_blank\"\u003esafety information\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42143631835229,"sku":"BSI-100H","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7956_1.jpg?v=1715201005"},{"product_id":"brill-armory-bsi-un-cure-adhesive-debonder","title":"Brill Armory \/ BSI UN-CURE - Debonder For All Super Glues","description":"\u003cp\u003eUN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"six columns\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorks Good On:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"check\"\u003e\n\u003cli\u003eCyanoacrylates\u003c\/li\u003e\n\u003cli\u003eSuper Glues\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eDirections: \u003c\/p\u003e\n\u003cp\u003eUn-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: COMBUSTIBLE LIQUID. WILL MAR MOST PLASTICS.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eView the manufacturers page for \u003ca href=\"https:\/\/bsi-inc.com\/hardware\/un_cure.html\" target=\"_blank\" data-mce-href=\"https:\/\/bsi-inc.com\/hardware\/un_cure.html\"\u003esafety information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42143754551389,"sku":"BSI-161H","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/IMG_7979.jpg?v=1715205422"},{"product_id":"retro-arms-qsc-spring-guide-holder","title":"Retro ARMS QSC Spring Guide Holder","description":"\u003cp\u003eLike a buffer tube, this Spring Guide Holder keeps the spring guide straight and prevents it from pitching up and down. This allows for easy and more reliable testing of a Retro Gearbox. Can be used with or without a lower receiver.\u003cbr\u003e\u003cbr\u003eThe installation of a buffer tube can impact the performance of a gun. This is due to the buffer tube screw straightening the gearbox when the lower receiver is also used, thereby altering alignment and potentially affecting the air seal. This spring guide holder replicates the same straightening and aligning effects as a buffer tube.\u003cbr\u003e\u003cbr\u003eWorks with Retro ARMS spring guides and Gearboxes.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Retro ARMS","offers":[{"title":"Default Title","offer_id":42274766782557,"sku":"RETRO-8811","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/4196_img-6693_8399.jpg?v=1717206851"},{"product_id":"modify-bushing-installation-and-removal-tool","title":"Modify Bushing Installation and Removal Tool","description":"\u003cp\u003eThis nifty tool allows bushings to be installed and removed evenly with a small wrench.\u003cbr\u003e\u003cbr\u003eUsing this tool is safer than hammering bushings in, which can warp or break a shell. \u003cbr\u003e\u003cbr\u003eThe key and wrench are made of thermally treated steel.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/Screenshot_2024-08-10_125456.png?v=1723319735\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Modify","offers":[{"title":"Default Title","offer_id":42567124090973,"sku":"MODIFY-TOOL-02","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/keymodifybushing.jpg?v=1701441960"},{"product_id":"zci-155rd-bb-speed-loader","title":"ZCI 155rd BB Speed Loader","description":"\u003cp\u003eTranslucent grey BB loader with adapter. 155rd capacity.\u003c\/p\u003e\n\u003c!----\u003e","brand":"ZCI","offers":[{"title":"Default Title","offer_id":42567495385181,"sku":"M-120","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/DSF8186.jpg?v=1723354420"},{"product_id":"solink-programming-card-for-solink-programmable-v5-brushless-motor","title":"Solink Programming Card for Solink V5 Brushless Motors","description":"\u003cp\u003eThis Programming Card allows the Solink V5 Brushless Motor to be adjusted in 1K RPM increments. Also adjusts torque.\u003cbr\u003e\u003cbr\u003eAdjustment range: 10K-46K RPM.\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Solink","offers":[{"title":"Default Title","offer_id":42577536483421,"sku":"Controller-W-46K","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/Controller-W-46K.jpg?v=1761784207"},{"product_id":"acetech-ac6000-mk-iii-bluetooth-airsoft-chronograph","title":"Acetech AC6000 MK. III Bluetooth Airsoft Chronograph (4x AA Alkaline battery ver)","description":"\u003cp\u003eA device for measuring power output and rate of fire for Airsoft replicas. Bluetooth functionality for ease of use and logging data.\u003c\/p\u003e\n\u003cp\u003eManufacturer provided stats:\u003c\/p\u003e\n\u003cp\u003e- Measures Muzzle Velocity from 30 m\/s ~ 400 m\/s (90 ft\/s ~ 1200 ft\/s)\u003cbr\u003e- Ammo parameter setting from  caliber 4.5mm, 6mm, 8mm and 9mm BB\u003cbr\u003e- 25 memory slots for velocity and ROF (Rate of fire)\u003cbr\u003e- FCC, CE, RoHS compliant\u003cbr\u003e- Tripod Ready mounting hole 1\/4-20 UNC (Screw for standard camera \/ camcorder tripods )\u003cbr\u003e- Can be powered with a USB-C cable (USB-C power cable with an adaptor Voltage 5V and current 0.5A or more)\u003cbr\u003e- ROF range: 100~5000RPM\u003cbr\u003e- Measuing tube diameter: (diameter 36mm)\u003cbr\u003e- Weight: 285g\u003cbr\u003e- Size : L x W x H = 130 x 108 x 61mm\u003cbr\u003e- Battery Type (AA alkaline batteries x4, not included)\u003cbr\u003e- Warranty: 12 months\u003cbr\u003e\u003cbr\u003ePackage contents: \u003cbr\u003e\u003cbr\u003e- AC6000 MK.III BT\u003cbr\u003e- User Manual\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original_2a2b9016-182f-4a5b-8d9f-bc69d6d6a06b.jpg?v=1725603888\" alt=\"\"\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original2.jpg?v=1725603888\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original3.jpg?v=1725603887\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original4.jpg?v=1725603888\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original5.jpg?v=1725603888\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original_2a2b9016-182f-4a5b-8d9f-bc69d6d6a06b.jpg?v=1725603888\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ACETECH","offers":[{"title":"Default Title","offer_id":42665837396061,"sku":"PAC6310-B-001","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/2000x_3dbb629d-e718-4379-a9ed-c61f4b2b4836.webp?v=1725603873"},{"product_id":"acetech-ac6000-mk-iii-bluetooth-airsoft-chronograph-exclusive-version-w-bag-4x-aa-alkaline-battery-ver","title":"Acetech AC6000 MK. III Bluetooth Airsoft Chronograph Exclusive Version w\/ Bag (4x AA Alkaline battery ver)","description":"\u003cp\u003eA device for measuring power output and rate of fire for Airsoft replicas. Bluetooth functionality for ease of use and logging data.\u003c\/p\u003e\n\u003cp\u003eManufacturer provided stats:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures Muzzle Velocity from 30 m\/s ~ 400 m\/s (90 ft\/s ~ 1200 ft\/s)\u003cbr\u003e- Ammo parameter setting from  caliber 4.5mm, 6mm, 8mm and 9mm BB\u003cbr\u003e- 25 memory slots for velocity and ROF (Rate of fire)\u003cbr\u003e- FCC, CE, RoHS compliant\u003cbr\u003e- Tripod Ready mounting hole 1\/4-20 UNC (Screw for standard camera \/ camcorder tripods )\u003cbr\u003e- Can be powered with a USB-C cable (USB-C power cable with an adaptor Voltage 5V and current 0.5A or more)\u003cbr\u003e- ROF range: 100~5000RPM\u003cbr\u003e- Measuing tube diameter: (diameter 36mm)\u003cbr\u003e- Weight: 317g\u003cbr\u003e- Size : L x W x H = 130 x 108 x 61mm\u003cbr\u003e- Battery Type (AA alkaline batteries x4, not included)\u003cbr\u003e- Warranty: 12 months\u003cbr\u003e\u003cbr\u003ePackage contents: \u003cbr\u003e\u003cbr\u003e- AC6000 MK.III BT\u003cbr\u003e- Chronograph Bag\u003cbr\u003e- User Manual\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original_2a2b9016-182f-4a5b-8d9f-bc69d6d6a06b.jpg?v=1725603888\" alt=\"\"\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original2.jpg?v=1725603888\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original2.jpg?v=1725603888\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original3.jpg?v=1725603887\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original3.jpg?v=1725603887\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original4.jpg?v=1725603888\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original4.jpg?v=1725603888\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original5.jpg?v=1725603888\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/original5.jpg?v=1725603888\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/contents_exclusive.jpg?v=1725604398\" alt=\"\"\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACETECH","offers":[{"title":"Default Title","offer_id":42666202103901,"sku":"PAC6310-B-101","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/800x_cfcca04a-0ec2-4d8b-8de3-c86299a36a11.webp?v=1725604277"},{"product_id":"acetech-chronograph-bag","title":"Acetech Chronograph Bag","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/bagdata.jpg?v=1725604685\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ACETECH","offers":[{"title":"Default Title","offer_id":42666317086813,"sku":"5PK80000001010","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/2000xbag1.webp?v=1725604696"}],"url":"https:\/\/brillarmory.com\/collections\/airsmithing-essentials\/t238.oembed","provider":"BRILL ARMORY","version":"1.0","type":"link"}