{"title":"All Products","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"lonex-spiral-bevel-and-helical-pinion-gear","title":"Lonex Spiral bevel and helical pinion gear","description":"\u003cp\u003eThese gears are well-designed, well-built, and offer some advantages over traditional spur (straight-cut) gears.\u003c\/p\u003e\n\u003cp\u003eThe angled teeth engage more gradually, causing them to run more smoothly and quietly. Because of this, these gears may provide a more desirable gear meshing noise when properly shimmed.\u003c\/p\u003e\n\u003cp\u003eThe bevel gear also has standard straight-cut teeth, which makes the bevel compatible with a wide range of ACM step gears.\u003c\/p\u003e\n\u003cp\u003eAdditionally, due to their design, these gears may yield an increase in load capacity. Axial load is also increased.\u003c\/p\u003e\n\u003cp\u003eThe use of high-quality steel and heat treatment makes these gears durable as well.\u003c\/p\u003e\n\u003cp\u003eWe recommend Loctite 648 (if available), 638, or JB weld for bonding the pinion gear.\u003c\/p\u003e","brand":"Lonex","offers":[{"title":"Default Title","offer_id":41357510705245,"sku":"GB-00-09","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/lonexspiralbevelbrillarmory.jpg?v=1701439916"},{"product_id":"shs-short-high-speed-motor","title":"SHS Short High Speed Motor","description":"\u003cp\u003eUpgrading your motor will boost your rate of fire, improve trigger response, and allow your gearbox to pull stronger springs. These motors are the high-speed type, which will yield more speed and less torque than the neodymium SHS HT motors.\u003c\/p\u003e\n\n\u003cp\u003eThis newest batch of SHS motors looks very promising. The brushes and magnets are shaped to the motor armature out of the box. Because of this, no break-in period is necessary. The armatures are nice and tight; not too much play. The D-type pinion gears look to be of a higher strength material and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, pinion slipping is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eThe magnets are stronger than most brands, and the retaining ring is made out of metal so it won't strip. These cans are the perfect complement to any armature, so the can is great for building motors of any TPA. Disassembly\/reassembly is easy.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357512081501,"sku":"DJ0007","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shshighspeedmotorshort.jpg?v=1701439955"},{"product_id":"shs-16tpa-short-high-torque-motor","title":"SHS 16TPA Short High Torque Motor","description":"\u003cp\u003eUpgrading your motor can boost the rate of fire, improve trigger response, and allow your gearbox to pull stronger springs.\u003c\/p\u003e\n\n\u003cp\u003eThis newest batch of SHS motors boast some great features. The magnets are strong and shimmed closely to the armature. The armatures themselves are shimmed tightly with minimal axial play. The D-type pinion gears are durable, and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, the pinion slipping downward is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eDisassembling an SHS motor is easy due to the good can design. The end bell can be easily removed and reinstalled.\u003c\/p\u003e\n\n\u003cp\u003eThe end bell retaining ring is made out of metal so it won't strip. Since disassembling this can is so easy, it's also great for building your own motor of any TPA.\u003c\/p\u003e\n\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\n\u003cp\u003e16TPA\u003cbr\u003e\nBall Bearings on endbell \u0026amp; tower\u003cbr\u003e\nNeodymium N38 Magnets\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357512147037,"sku":"DJ0006","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shshtshort2016saturatedbrill.jpg?v=1701439958"},{"product_id":"shs-16tpa-long-high-torque-motor","title":"SHS 16TPA Long High Torque Motor","description":"\u003cp\u003eUpgrading your motor can boost rate of fire, improve trigger response, and allow your gearbox to pull stronger springs.\u003c\/p\u003e\n\n\u003cp\u003eThis newest batch of SHS motors boast some great features. The magnets are strong and shimmed closely to the armature. The armatures themselves are shimmed tightly with minimal axial play. The D-type pinion gears are durable, and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, the pinion slipping downward is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eDisassembling an SHS motor is easy due to the good can design. The endbell can be easily removed and reinstalled.\u003c\/p\u003e\n\n\u003cp\u003eThe endbell retaining ring is made out of metal so it won't strip. Since disassembling this can is so easy, it's also great for building a custom motor.\u003c\/p\u003e \n\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\n\u003cp\u003e16TPA\u003cbr\u003e\nBall Bearings on endbell \u0026amp; tower\u003cbr\u003e\nNeodymium N38 Magnets\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357512245341,"sku":"DJ0005","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shshtlong22016brillsaturated.jpg?v=1701439960"},{"product_id":"shs-v3-ak-selector-plate","title":"SHS V3 AK Selector Plate","description":"\u003cp\u003eAffordable plastic selector plate for V3 AK replicas.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357512638557,"sku":"NB0020","price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsakselectornewest.jpg?v=1701439969"},{"product_id":"shs-g36-v3-selector-plate","title":"SHS G36 V3 Selector Plate","description":"\u003cp\u003eAffordable plastic selector plate for V3 G36 replicas.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357512704093,"sku":"NB0022","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsg3selectornew.jpg?v=1701439971"},{"product_id":"shs-v3-trigger-contacts","title":"SHS V3 Trigger Contacts","description":"\u003cp\u003eAffordable nylon-housed contacts. You can find these preinstalled in some completed 3034-based MOSFET's.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357513031773,"sku":"NB0026","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsv3contactsnew.jpg?v=1701439981"},{"product_id":"shs-o-type-steel-pinion-gear","title":"SHS O-type Steel Pinion Gear","description":"\u003cp\u003eThis O-type Steel Pinion gear is well known for its strength and affordability. SHS pinions have been used extensively, and users find that they mesh well with most Gear sets. If you own an SHS gearset, you can be sure that this pinion will mesh well.\u003c\/p\u003e\n\u003cp\u003eThis O-type pinion gear can be pressed onto O-type and D-type shafts. Loctite 638 or JB Weld is recommended ensure that the pinion is secure.\u003c\/p\u003e\n\u003cp\u003e*Gear appearance may vary due to differences in batch production\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357513326685,"sku":"CL5006","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shspinionotypenew.jpg?v=1701439988"},{"product_id":"shs-30-piece-shim-set","title":"SHS ~30-Piece Shim Set","description":"\u003cp\u003eShimming can make or break an AEG. Proper shimming increases reliability, efficiency, and even ROF in some cases. Motors can draw less power and run cooler on properly shimmed gearsets as well. Brill Armory recommends the pinion-to-bevel shimming method and checking for proper motor alignment \u0026amp; height prior to shimming the gears.\u003c\/p\u003e\n\n\u003cp\u003ePlease note: Shims may come in different colors and shapes depending on the batch produced. The amount of shims in the pack may vary slightly (about 27 to 33 shims).\u003c\/p\u003e\n\n\u003cp\u003eAll silver-colored shim pack contains ~10x 0.1mm, 0.2mm, and 0.3mm shims.\u003cbr\u003e\nMixed-color pack contains ~10x 0.1, 0.15, and 0.2mm shims.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357513392221,"sku":"DQ0028","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSCF9852new.jpg?v=1701439991"},{"product_id":"1-32-70d-die-cut-neoprene-buffer","title":"1\/32\" 70D Die Cut Neoprene Buffer","description":"\u003cp\u003eThese Neoprene buffers are die cut and concentric.\u003c\/p\u003e \n\n\u003cp\u003eNeoprene buffers are typically adhered on top of Sorbothane buffers for additional protection. Cyanoacrylate (Super Glue) is the recommended adhesive for installation. Neoprene can be used by itself or in conjunction with sorbothane.\u003c\/p\u003e","brand":"Northern Hurricane 7","offers":[{"title":"Default Title","offer_id":41357513523293,"sku":"NH7-NEO132","price":1.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/DSF7479.jpg?v=1708675194"},{"product_id":"shs-v2-cylinder-head","title":"SHS V2 Cylinder Head","description":"\u003cp\u003eThis is a 7075 CNC Machined Cylinder Head by SHS.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Piston assembly is constantly slamming against the Cylinder Head during a gearbox cycle, the Cylinder Head endures a lot of stress. Plastic Cylinder Heads tend to crack and fail over time as a result of these stressors. Unlike stock plastic Cylinder Heads, this unit is built from high-grade aluminum and can withstand the strongest of springs.\u003c\/p\u003e\n\n\u003cp\u003eDue to the dual O-ring design, this Cylinder Head makes an excellent seal. Many Airsofters use Teflon tape to aid in Gearbox compression, but I have not found any need for modification when using these SHS Cylinder Heads. Having good compression in your gun improves efficiency and accuracy.\u003c\/p\u003e\n\n\u003cp\u003eNote: This Cylinder Head might need the side holes to be wider to fit into some Gearboxes. The holes can be enlarged with a dremel tool.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514244189,"sku":"GT0028","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsm4CHnewer.jpg?v=1701440017"},{"product_id":"shs-v3-ak-double-o-ring-cylinder-head","title":"SHS V3 AK Double O-ring Cylinder Head","description":"\u003cp\u003eThis is a 7075 CNC Machined Cylinder Head by SHS.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Piston assembly is constantly slamming against the Cylinder Head during a gearbox cycle, the Cylinder Head endures a lot of stress. Plastic Cylinder Heads tend to crack and fail over time as a result of these stressors. Unlike stock plastic Cylinder Heads, this unit is built from high-grade aluminum and can withstand the strongest of springs.\u003c\/p\u003e\n\n\u003cp\u003eDue to the dual O-ring design, this Cylinder Head makes an excellent seal. Many Airsofters use Teflon tape to aid in Gearbox compression, but I have not found any need for modification when using these SHS Cylinder Heads. Having good compression in your gun improves efficiency and accuracy.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514375261,"sku":"GT0014","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsakCHnewest.jpg?v=1701440019"},{"product_id":"shs-pom-piston-head","title":"SHS POM Piston Head","description":"\u003cp\u003eThis Piston Head features 6 equidistant ports and thrust bearings. I recommend applying threadlocker when installing this onto the Piston. The O-ring is pliable, and the seam is barely noticeable.\u003c\/p\u003e\n\n\u003cp\u003ePiston Head may be Red or Black.\u003c\/p\u003e","brand":"Super Shooter","offers":[{"title":"Default Title","offer_id":41357514506333,"sku":"PT0022","price":7.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsPOMphnew.jpg?v=1701440023"},{"product_id":"shs-v3-tappet-plate","title":"SHS V3 Tappet Plate","description":"\u003cp\u003eThis is a strong Nylon tappet plate by SHS. Tappet plates can take a lot of abuse in high-speed set ups. Because of this, Airsoft mechanics usually upgrade their tappet plates for ones made of stronger materials.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514571869,"sku":"NB0025","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/tappetv3newestshs.jpg?v=1701440026"},{"product_id":"shs-v2-tappet-plate","title":"SHS V2 Tappet Plate","description":"\u003cp\u003eThis is a strong Nylon tappet plate by SHS. Tappet plates can take a lot of abuse in high-speed set ups. Because of this, Airsoft mechanics usually upgrade their tappet plates for ones made of stronger materials.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514637405,"sku":"NB0001","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsv2tappetnewest.jpg?v=1701440028"},{"product_id":"shs-metal-sector-delayer-chip","title":"SHS Metal Sector Delayer Chip","description":"\u003cp\u003eA Sector Chip retracts the Tappet Plate for a longer time during a gearbox cycle. This ensures that your BB's feed properly at higher rates of fire. The metal construction of this Chip ensures that it will never wear down. This Chip may need some slight sanding on the cam contact point to fit snugly.\u003c\/p\u003e\n\u003cp\u003eIf the sector gear already has an enlarged tappet cam, this delayer chip may not be compatible.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514702941,"sku":"PM0044","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsmetaldelayernewest.jpg?v=1701440030"},{"product_id":"super-shooter-cnc-v3-spring-guide","title":"Super Shooter CNC V3 Spring Guide","description":"\u003cp\u003eThis is a quality Spring Guide made by Super Shooter (Pro edition SHS)\u003c\/p\u003e\n\n\u003cp\u003eThe Spring Guide is considered to be a necessary upgrade component by most Airsmiths. It increases consistency, boosts FPS, and increases the life of the Spring. It's the perfect complement for any high performance setup.\u003c\/p\u003e\n\n\u003cp\u003eMost stock Spring guides are made of cheap plastic and simply cannot handle high-stress guns.\u003c\/p\u003e\n\n\u003cp\u003eThis Spring Guide is made from Stainless Steel and utilizes Thrust Bearings.\u003c\/p\u003e","brand":"Super Shooter","offers":[{"title":"Default Title","offer_id":41357514801245,"sku":"WD0009","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsv3springguidenewest.jpg?v=1701440033"},{"product_id":"super-shooter-cnc-v2-spring-guide","title":"Super Shooter CNC V2 Spring Guide","description":"\u003cp\u003eThis is a quality Spring Guide made by Super Shooter (Pro edition SHS)\u003c\/p\u003e\n\n\u003cp\u003eThe Spring Guide is considered to be a necessary upgrade component by most Airsmiths. It increases consistency, boosts FPS, and increases the life of the Spring. It's the perfect complement for any high performance setup.\u003c\/p\u003e\n\n\u003cp\u003eMost stock Spring guides are made of cheap plastic and simply cannot handle high-stress guns.\u003c\/p\u003e\n\n\u003cp\u003eThis Spring Guide is made from Stainless Steel and utilizes Thrust Bearings.\u003c\/p\u003e","brand":"Super Shooter","offers":[{"title":"Default Title","offer_id":41357514866781,"sku":"WD0008","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsv2springguidenewestlolzxasdas.jpg?v=1701440034"},{"product_id":"shs-g36-aluminum-o-ring-air-nozzle","title":"SHS G36 Aluminum O-ring Air Nozzle","description":"\u003cp\u003eAn upgraded Air Nozzle can greatly enhance the performance of an AEG. Most stock air nozzles leak, which causes inefficiency and loss of FPS. This Air Nozzle has an O-ring, which stops leaks and creates a perfect seal with the Cylinder Head.\u003c\/p\u003e\n\u003cp\u003eHaving a good air seal in your AEG can also increase accuracy since the FPS variation between shots is minimized. This O-ring Air Nozzle is made of aluminum, so it won't deform and scratch over time like most stock plastic Air Nozzles.\u003c\/p\u003e\n\u003cp\u003eIt is extremely hard, if not, impossible to get a perfect air seal without the use of an O-ring Air Nozzle.\u003c\/p\u003e\n\u003cp\u003eMeasures ~24.28mm long.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514899549,"sku":"TZ0015","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/asdasdd.jpg?v=1701440036"},{"product_id":"shs-v7-m14-aluminum-o-ring-air-nozzle","title":"SHS V7 M14 Aluminum O-ring Air Nozzle","description":"\u003cp\u003eAn upgraded Air Nozzle can greatly enhance the performance of an AEG. Most stock air nozzles leak, which causes inefficiency and loss of FPS. This Air Nozzle has an O-ring, which stops leaks and creates a perfect seal with the Cylinder Head.\u003c\/p\u003e\n\n\u003cp\u003eHaving a good air seal in your AEG can also increase accuracy since the FPS variation between shots is minimized. This O-ring Air Nozzle is made of aluminum, so it won't deform and scratch over time like most stock plastic Air Nozzles.\u003c\/p\u003e\n\n\u003cp\u003eIt is extremely hard, if not, impossible to get a perfect air seal without the use of an O-ring Air Nozzle.\u003c\/p\u003e\n\n\u003cp\u003eMeasures 21.5mm long\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357514932317,"sku":"TZ0061","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/m14loloolollol.jpg?v=1701440038"},{"product_id":"shs-v2-mp5-aluminum-o-ring-air-nozzle","title":"SHS V2 MP5 Aluminum O-ring Air Nozzle","description":"\u003cp\u003eAn upgraded Air Nozzle can greatly enhance the performance of an AEG. Most stock air nozzles leak, which causes inefficiency and loss of FPS. This Air Nozzle has an O-ring, which stops leaks and creates a perfect seal with the Cylinder Head.\u003c\/p\u003e\n\n\u003cp\u003eHaving a good air seal in your AEG can also increase accuracy since the FPS variation between shots is minimized. This O-ring Air Nozzle is made of aluminum, so it won't deform and scratch over time like most stock plastic Air Nozzles.\u003c\/p\u003e\n\n\u003cp\u003eIt is extremely hard, if not, impossible to get a perfect air seal without the use of an O-ring Air Nozzle.\u003c\/p\u003e\n\n\u003cp\u003eMeasures 17.7mm long.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515096157,"sku":"TZ0069","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/mp5nozzlol.jpg?v=1701440039"},{"product_id":"shs-long-high-speed-motor","title":"SHS Long High Speed Motor","description":"\u003cp\u003eUpgrading your motor will boost your rate of fire, improve trigger response, and allow your gearbox to pull stronger springs. These motors are the high-speed type, which will yield more speed and less torque than the neodymium SHS HT motors.\u003c\/p\u003e\n\n\u003cp\u003eThis newest batch of SHS motors looks very promising. The brushes and magnets are shaped to the motor armature out of the box. Because of this, no break-in period is necessary. The armatures are nice and tight; not too much play. The D-type pinion gears look to be of a higher strength material and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, pinion slipping is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eThe magnets are stronger than most brands, and the retaining ring is made out of metal so it won't strip. These cans are the perfect complement to any armature, so the can is great for building motors of any TPA. Disassembly\/reassembly is easy.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515489373,"sku":"DJ0008","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shshslong.jpg?v=1701440051"},{"product_id":"shs-v2-m4-aluminum-o-ring-air-nozzle","title":"SHS V2 M4 Aluminum O-ring Air Nozzle","description":"\u003cp\u003eAn upgraded Air Nozzle can greatly enhance the performance of an AEG. Most stock air nozzles leak, which causes inefficiency and loss of FPS. This Air Nozzle has an O-ring, which stops leaks and creates a perfect seal with the Cylinder Head.\u003c\/p\u003e\n\n\u003cp\u003eHaving a good air seal in your AEG can also increase accuracy since the FPS variation between shots is minimized. This O-ring Air Nozzle is made of aluminum, so it won't deform and scratch over time like most stock plastic Air Nozzles.\u003c\/p\u003e\n\n\u003cp\u003eIt is extremely hard, if not, impossible to get a perfect air seal without the use of an O-ring Air Nozzle.\u003c\/p\u003e\n\n\u003cp\u003eMeasures 21.4mm long.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515718749,"sku":"TZ0034","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/m4shsnozzlenewlolz.jpg?v=1701440053"},{"product_id":"shs-6mm-steel-bushings","title":"SHS 6mm Steel Bushings","description":"\u003cp\u003eStandard PIM bushings. Great replacement for cross-slotted or nylon bushings. Porous and retains lubricant well.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515751517,"sku":"ZT0025","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shs6mmsteelbushingsnew.jpg?v=1701440055"},{"product_id":"shs-7mm-steel-bushings","title":"SHS 7mm Steel Bushings","description":"\u003cp\u003eStandard PIM bushings. Great replacement for cross-slotted or nylon bushings. Porous and retains lubricant well.\u003c\/p\u003e\n\n\u003cp\u003eFlanges are large at 1.05mm\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515849821,"sku":"ZT0024","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shs7mmbushingssteelnew.jpg?v=1701440057"},{"product_id":"shs-v2-spring-set","title":"SHS V2 Spring Set","description":"\u003cp\u003eStandard replacement gearbox springs. \u003cbr\u003e\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357515915357,"sku":"TH0037","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/20121122162453169.jpg?v=1701440060"},{"product_id":"shs-v3-spring-set","title":"SHS V3 Spring Set","description":"\u003cp\u003eThis set includes all internal Gearbox springs for the V3 Gearbox except for the trigger contact spring. I find that these springs are better than the ones that come standard in most Gearboxes.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357516013661,"sku":"TH0038","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/201351784956831.jpg?v=1701440062"},{"product_id":"shs-v2-m4-airsoft-safety-latch","title":"SHS V2 M4 Airsoft Safety Latch","description":"\u003cp\u003eThis Safety Latch is composed of Nylon Fiber and has adequate strength. It's a great replacement for worn or damaged Safety Latches.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357516079197,"sku":"NB0016","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/safety.jpg?v=1701440063"},{"product_id":"zci-pinion-pull-press-tool","title":"ZCI Pinion Pull \u0026 Press Tool","description":"\u003cp\u003eThis tool can remove and install O-type pinion gears!\u003c\/p\u003e\n\u003cp\u003eInstalling a pinion gear that is too tight can damage the motor or tool, so it's crucial to install pinion gears carefully.\u003c\/p\u003e\n\u003cp\u003eSome pinion gears may need to be thermally expanded with a heat gun to ease installation. Lubricating oil is also recommended for installation.\u003c\/p\u003e\n\u003cp\u003eIf installation of the pinion gear remains difficult, it may be necessary to remove some material from the armature. This can be done by securely fastening the motor to a vice and running it at very low voltage with the motor tower and pinion gear removed. While the shaft is in motion, carefully apply sandpaper to remove material. It is crucial to remove material in small increments, as excessive removal can result in an overly loose pinion fit.\u003cbr\u003e\u003cbr\u003eFor tight-fitting O-shafts, Loctite 638 is the recommended adhesive. For D-type or looser fit pinions, JB weld may be required for best adhesion.\u003cbr\u003e\u003c\/p\u003e","brand":"ZCI","offers":[{"title":"Default Title","offer_id":41357516111965,"sku":"M-147","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/zcipiniontoolnewest.jpg?v=1701440065"},{"product_id":"super-shooter-cnc-machined-piston-head","title":"Super Shooter CNC Machined Piston Head","description":"\u003cp\u003eAluminum construction with thrust bearings. Durable and well-machined.\u003c\/p\u003e","brand":"Super Shooter","offers":[{"title":"Default Title","offer_id":41357516243037,"sku":"PT0003","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/supershootercncpistonhead.jpg?v=1701440068"},{"product_id":"shs-v2-trigger-contacts","title":"SHS V2 Trigger Contacts","description":"\u003cp\u003eAffordable nylon-housed contacts. You can find these preinstalled in some completed 3034-based MOSFET's.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357516308573,"sku":"NB0027","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsv2switchnew.jpg?v=1701440070"},{"product_id":"shs-v3-g36-long-cylinder-head","title":"SHS V3 G36 Long Cylinder Head","description":"\u003cp\u003eThis is a 7075 CNC Machined Cylinder Head by SHS.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Piston assembly is constantly slamming against the Cylinder Head during a gearbox cycle, the Cylinder Head endures a lot of stress. Plastic Cylinder Heads tend to crack and fail over time as a result of these stressors. Unlike stock plastic Cylinder Heads, this unit is built from high-grade aluminum and can withstand the strongest of springs.\u003c\/p\u003e\n\n\u003cp\u003eDue to the dual O-ring design, this Cylinder Head makes an excellent seal. Many Airsofters use Teflon tape to aid in Gearbox compression, but I have not found any need for modification when using these SHS Cylinder Heads. Having good compression in your gun improves efficiency and accuracy.\u003c\/p\u003e\n\n\u003cp\u003eBase of nozzle to nozzle tip length: 23.33mm\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357516636253,"sku":"GT0023","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsg36longchnewest.jpg?v=1701440076"},{"product_id":"shs-v3-g36-short-cylinder-head","title":"SHS V3 G36 Short Cylinder Head","description":"\u003cp\u003eThis is a 7075 CNC Machined Cylinder Head by SHS.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Piston assembly is constantly slamming against the Cylinder Head during a gearbox cycle, the Cylinder Head endures a lot of stress. Plastic Cylinder Heads tend to crack and fail over time as a result of these stressors. Unlike stock plastic Cylinder Heads, this unit is built from high-grade aluminum and can withstand the strongest of springs.\u003c\/p\u003e\n\n\u003cp\u003eDue to the dual O-ring design, this Cylinder Head makes an excellent seal. Many Airsofters use Teflon tape to aid in Gearbox compression, but I have not found any need for modification when using these SHS Cylinder Heads. Having good compression in your gun improves efficiency and accuracy.\u003c\/p\u003e\n\n\u003cp\u003eBase of nozzle to nozzle tip length: 16.87mm\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357516669021,"sku":"GT0018","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsg36CHnewest.jpg?v=1701440078"},{"product_id":"steel-high-torque-0-05-1-27mm-hex-key-for-pinion-gears","title":"Steel High Torque 0.05\" (1.27mm) Hex Key for Pinion Gears","description":"\u003cp\u003eThis High Torque L-shaped Hex key is the perfect size for Pinion Gears! It's rigid and made in the USA.\u003c\/p\u003e\n\n\u003cp\u003eIf you are removing the Pinion screw which was held with adhesive, I recommend heating the Pinion with a heat gun prior to using the Hex key.\u003c\/p\u003e","brand":"BRILL ARMORY","offers":[{"title":"Default Title","offer_id":41357516800093,"sku":null,"price":0.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/hexkey.jpg?v=1701440083"},{"product_id":"shs-18-72-1-sr25-steel-gears","title":"SHS 18.72:1 SR25 Steel Gears","description":"\u003cp\u003eSHS has made some very significant revisions to their previous Gear designs. These new Gears are more reliable and much better machined than the previous generation.\u003c\/p\u003e\n\n\u003cp\u003eFirstly, the Sector and Step gears are now fully CNC machined. CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e \n\n\u003cp\u003eAll of the shafts on these new gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft. Also, SHS has reformed their previous bevel design due to the change in Anti-Reversal latch catches.\u003c\/p\u003e\n\n\u003cp\u003eAlso, SHS uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357517095005,"sku":"CL14013","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/sr25shsgearz.jpg?v=1701440090"},{"product_id":"shs-v7-21-1-m14-steel-gears","title":"SHS V7 21:1 (M14) Steel Gears","description":"","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357517127773,"sku":"CL6010","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/m14shsgears.jpg?v=1701440091"},{"product_id":"shs-anti-reversal-latch-w-spring","title":"SHS Anti-Reversal Latch w\/ Spring","description":"\u003cp\u003eSHS ARL made of Steel with a brass collar. Good replacement for pot-metal ARL's.\u003cbr\u003e\u003cbr\u003eAppearance may vary depending on batch.\u003cbr\u003e\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357517258845,"sku":"CL5003","price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsarl.jpg?v=1701440093"},{"product_id":"prometheus-ms190sp-aeg-spring","title":"Prometheus MS190SP AEG Spring","description":"\u003cp\u003eThis is a high-quality Prometheus Spring made in Japan.\u003c\/p\u003e\n\n\u003cp\u003eThese springs are generally favored by Airsoft Mechanics as they can handle a significant amount of stress without breaking. Another benefit is that these springs have no coating that can easily rub off inside the gearbox.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that the final AEG power output is dependent on a ton of factors, and as such Brill Armory cannot guarantee a certain FPS. Some factors include compression, inner barrel length, cylinder type, inner barrel diameter, BB's used, bucking\/hop-up parts used, and tappet timing.\u003c\/p\u003e","brand":"Laylax","offers":[{"title":"Default Title","offer_id":41357518209117,"sku":"4582109580363","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/prommyspring_f4fa83aa-f4ca-4c5f-ba8a-d6c103c9bc13.jpg?v=1701440114"},{"product_id":"shs-8mm-steel-bushings","title":"SHS 8mm Steel Bushings","description":"\u003cp\u003eStandard PIM bushings. Great replacement for cross-slotted or nylon bushings. Porous and retains lubricant well.\u003c\/p\u003e\n\n\u003cp\u003eFlanges are very thick at 1.07mm.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357518405725,"sku":"ZT0027","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/8mmbushingsshsdanew.jpg?v=1701440117"},{"product_id":"siegetek-gen-3-10-44-dsg-gear-set-for-v2-v3","title":"Siegetek GEN 3 10.44 DSG Gear set for V2\/V3","description":"\u003cp\u003eThis Gear Set can yield a ridiculously high rate of fire. It is also exceptionally hard and well-designed.\u003c\/p\u003e\n\u003cp\u003eInstalling a DSG Gearset requires technical expertise and fine tuning of the Gearbox. Research and read voraciously to unlock the full potential of these gears. The official DSG instruction manual is a good start: http:\/\/www.siegetek.com\/instructions\/cyclone.pdf\u003cbr\u003e\u003cbr\u003eAs mentioned in the installation notes, trimming the tappet plate to at least 11mm, and installing a spring guide spacer OR using a strong spring is necessary for installation.\u003cbr\u003e\u003cbr\u003eNote: product photo may vary from actual product as these gears are updated with improvements between batches.\u003cbr\u003e\u003cbr\u003eWe recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357518504029,"sku":"GS-RP-C","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/siegetek10441newgen3dsg.jpg?v=1701440120"},{"product_id":"siegetek-gen-3-14-09-dsg-gear-set-for-v2-v3","title":"Siegetek GEN 3 14.09 DSG Gear set for V2\/V3","description":"\u003cp\u003eThis Gear Set can yield a ridiculously high rate of fire. It is also exceptionally hard and well-designed.\u003c\/p\u003e\n\u003cp\u003eInstalling a DSG Gearset requires technical expertise and fine tuning of the Gearbox. Research and read voraciously to unlock the full potential of these gears. The official DSG instruction manual is a good start: http:\/\/www.siegetek.com\/instructions\/cyclone.pdf\u003cbr\u003e\u003cbr\u003eAs mentioned in the installation notes, trimming the tappet plate to at least 11mm, and installing a spring guide spacer OR using a strong spring is necessary for installation.\u003cbr\u003e\u003cbr\u003eNote: product photo may vary from actual product as these gears are updated with improvements between batches.\u003cbr\u003e\u003cbr\u003eWe recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357518536797,"sku":"GS-R-C","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/gen3dsg1409new.jpg?v=1701440121"},{"product_id":"siegetek-gen-2-14-09-revolution-gear-set-for-v2-v3","title":"Siegetek GEN 2 14.09 Revolution Gear Set for V2\/V3","description":"\u003cp\u003eThese gears are well-designed and highly strengthened, making them the most efficient and strongest gears in the industry. This Gear set will give you a very high rate of fire when paired with the right motor and battery. The gears are also exceptionally hard and well-designed.\u003cbr\u003e\u003cbr\u003eWe recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.\u003cbr\u003e\u003cbr\u003eOfficial instruction manual: http:\/\/siegetek.com\/instructions\/notes.pdf\u003cbr\u003e\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357518798941,"sku":"GS-R","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/DSF7484.jpg?v=1708727973"},{"product_id":"siegetek-gen-2-10-44-revolution-plus-gear-set-for-v2-v3","title":"Siegetek GEN 2 10.44 Revolution Plus Gear Set for V2\/V3","description":"\u003cp\u003eThis Gear set will give you a very high rate of fire when paired with the right motor and battery. The gears are also exceptionally hard and well-designed.\u003c\/p\u003e\n\u003cp\u003eTechnical skill required for installation.\u003cbr\u003e\u003cbr\u003eWe recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.\u003cbr\u003e\u003cbr\u003eOfficial instruction manual: http:\/\/siegetek.com\/instructions\/notes.pdf\u003cbr\u003e\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357518831709,"sku":"GS-RP","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/DSF7485.jpg?v=1708675268"},{"product_id":"siegetek-spring-guide-spacer-for-dsg-system","title":"Siegetek Spring Guide Spacer for DSG System","description":"\u003cp\u003eThis spacer further compresses springs to increase their power. Siegetek has a graph which shows estimated FPS with and without the spacer in Cyclone Dual-Sector Gear builds.\u003c\/p\u003e \n\n\u003cp\u003ePage 7 of 8: http:\/\/www.siegetek.com\/instructions\/cyclone.pdf\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357518930013,"sku":"SGS","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/sgsnewgreen.jpg?v=1701440136"},{"product_id":"siegetek-pinion-gear","title":"Siegetek Pinion Gear","description":"\u003cp\u003eThis fully CNC machined pinion gear provides \u003cstrong\u003eoptimal geometry and meshing\u003c\/strong\u003e for Siegetek bevel gears. This pinion is incredibly strong and fits very tight on most motor shafts. If in the rare event that this pinion is a loose fit, the undersized bore version (G4U) is required instead. The Siegetek Pinion can be installed onto a D-type shaft and will not cause concentricity issues.\u003cbr\u003e\u003cbr\u003eThe pinion gear should be shimmed no more than .1mm away from a Siegetek bevel gear. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease exercise caution when installing this with a pinion puller. This pinion will easily break a pinion puller or bend a motor shaft if you aren't careful. The pinion should never require a massive amount of force to be installed. If that happens, the pinion may be heated to ease installation, but do not heat it over 400F. The armature can also be narrowed with sandpaper if absolutely necessary.\u003c\/p\u003e\n\u003cp\u003eThis pinion should never be installed free of lubricant. A few drops of lubricating oil into the bore of the pinion gear and the edges of the motor shaft tip will do.\u003c\/p\u003e","brand":"Siegetek Concepts","offers":[{"title":"Default Title","offer_id":41357519061085,"sku":"G4","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/sc-gear-9.jpg?v=1701440139"},{"product_id":"shs-d-type-pinion-gear","title":"SHS D-type Pinion Gear","description":"\u003cp\u003eThis is a strong, affordable D-type pinion gear. It is best used with SHS gear sets, but these pinions have been proven to mesh well with many different brands.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357519192157,"sku":"CL5004","price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shsdtypepinion.jpg?v=1701440143"},{"product_id":"zci-balanced-long-motor","title":"ZCI Balanced Long Motor","description":"\u003cp\u003eThis is a Balanced 16TPA Long Type Neodymium Motor by ZCI. As the name implies, it's designed to give a balanced output of torque and speed.\u003c\/p\u003e\n\n\u003cp\u003eThis motor should perform similarly to the SHS High Torque motors. The shaft is outfitted with a D-type pinion gear.\u003c\/p\u003e\n\n\u003cp\u003eThe magnets are just as strong as the SHS ones and wrap nicely around the armature. The armatures are well shimmed on all of the ZCI motors that I've handled.\u003c\/p\u003e \n\n\u003cp\u003eOverall you can't go wrong with this motor. With this kind of price and performance, there is no reason to keep a stock ferrous motor!\u003c\/p\u003e","brand":"ZCI","offers":[{"title":"Default Title","offer_id":41357520044125,"sku":"M-144","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/ZCI16TPALONG.jpg?v=1701440168"},{"product_id":"dream-army-lipo-low-voltage-alarm","title":"Dream Army Lipo Low Voltage Alarm","description":"\u003cp\u003eThis is a Lipo Alarm by Dream Army. This alarm will beep to alert the user of a low-voltage Lipo battery. An overly discharged Lipo battery usually results in permanent damage and cannot be recovered under normal means. That being said, a Lipo Alarm can save your batteries!\u003c\/p\u003e\n\n\u003cp\u003eThis Lipo Alarm works with 2-3 cell (7.4 and 11.1v respectively) Lipo batteries.\u003c\/p\u003e","brand":"Dream Army","offers":[{"title":"Default Title","offer_id":41357520076893,"sku":"VF118","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/dabuzzerbril.l.jpg?v=1701440171"},{"product_id":"shs-15-tooth-full-metal-rack-piston-w-piston-head","title":"SHS 15-tooth Full Metal Rack Piston w\/ Piston Head","description":"\u003cp\u003eThis piston comes with a durable thrust bearing metal piston head. The Piston and Piston Head together weigh 29 grams.\u003c\/p\u003e\n\n\u003cp\u003eThese Pistons are made of Glass-fiber Nylon, which has superior wear resistance and can endure much more prolonged stress than Polycarbonate Pistons.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":41357520175197,"sku":"TT0081","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/shspistonwphnew.jpg?v=1701440173"},{"product_id":"lonex-v2-8mm-gearbox-shell","title":"Lonex V2 8mm Gearbox Shell for M16 Series","description":"\u003cp\u003eA Gearbox shell that has good tolerances and measurements is best for optimal performance. That being said, this Lonex Gearbox shell is favored among Airsoft mechanics due to its fine design and stable properties. This shell is made of Die Cast Zinc Alloy and has reinforcement in critical areas, making it more reliable than many stock gearbox shells.\u003c\/p\u003e\n\u003cp\u003eThe screw mounting threads are robust, and the tight tolerances within the Gearbox make sure that gears mesh with ideal operation.\u003c\/p\u003e\n\u003cp\u003eThis shell can take a variety of upgrade parts, and even comes with several Gearbox components. It is complemented with Lonex 8mm Bearings and a nylon reinforced Tappet plate.\u003c\/p\u003e\n\u003cp\u003eThis V2 Gearbox is outfitted with:\u003c\/p\u003e\n\u003cp\u003e- Lonex 8mm Bearings\u003cbr\u003e- Lonex Reinforced Nylon V2 Tappet\u003cbr\u003e- Lonex V2 M4\/M16\/AR Selector Plate\u003cbr\u003e- Lonex V2 Gearbox screws\u003c\/p\u003e\n\u003cp\u003eOverall, this is a \u003cspan style=\"font-size: 0.875rem;\"\u003ehigh quality Gearbox shell at an affordable price.\u003c\/span\u003e\u003c\/p\u003e","brand":"Lonex","offers":[{"title":"Default Title","offer_id":41357520273501,"sku":"GB-00-01","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/lonexgbstock.jpg?v=1701440176"}],"url":"https:\/\/brillarmory.com\/collections\/all\/jvan.oembed","provider":"BRILL ARMORY","version":"1.0","type":"link"}