{"title":"Rocket Airsoft","description":"\u003cp\u003eRocket Airsoft parts\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"rocket-airsoft-dual-o-ring-v2-m4-air-nozzle","title":"Rocket Airsoft Dual O-ring V2 M4 Air Nozzle","description":"\u003cp\u003eThis Air nozzle has two O-rings, which is helpful for trapping grease and maintaining the air seal.\u003c\/p\u003e\n\n\u003cp\u003eAn upgraded Air Nozzle can greatly enhance the performance of an AEG. Most stock air nozzles leak, which causes inefficiency and loss of FPS. This Air Nozzle has two O-rings, which stops leaks and creates a perfect seal with the Cylinder Head. The extra O-ring may help trap grease, keeping the O-rings lubricated for a longer time.\u003c\/p\u003e\n\n\u003cp\u003eHaving a good air seal in your AEG can also increase accuracy since the FPS variation between shots is minimized. This O-ring Air Nozzle is made of aluminum, so it won't deform and scratch over time like most stock plastic Air Nozzles.\u003c\/p\u003e\n\n\u003cp\u003eIt is extremely hard, if not, impossible to get a perfect air seal without the use of an O-ring Air Nozzle.\u003c\/p\u003e\n\n\u003cp\u003eMeasures 21.44mm long.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357579845725,"sku":"NOZ02N","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7040.jpg?v=1701441867"},{"product_id":"rocket-airsoft-16tpa-long-high-torque-motor","title":"Rocket Airsoft 16TPA Long High Torque Motor","description":"\u003cp\u003eUpgrading your motor can boost rate of fire, improve trigger response, and allow your gearbox to pull stronger springs.\u003c\/p\u003e\n\n\u003cp\u003eThe magnets are strong and shimmed closely to the armature. The armatures themselves are shimmed tightly with minimal axial play. Because the shaft is D-type, the pinion slipping downward is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eThe end bell can be easily removed and reinstalled, unlike the locking tab design of other motors.\u003c\/p\u003e\n\n\u003cp\u003eThe end bell retaining ring is made out of metal so it won't strip. Since disassembling this can is so easy, it's also great for building your own motor of any TPA.\u003c\/p\u003e\n\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\n\u003cp\u003e16TPA\u003cbr\u003e\nBall Bearings on end bell \u0026amp; tower\u003cbr\u003e\nNeodymium N38 Magnets\u003cbr\u003e\nMeasures 88mm from bottom of endbell to top of pinion\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357584695389,"sku":"MOTHT2","price":31.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/rocketHTmotorlong.jpg?v=1701442056"},{"product_id":"rocket-airsoft-14-5t-pre-lightened-metal-rack-piston","title":"Rocket Airsoft 14.5T Pre-lightened Metal Rack Piston","description":"\u003cp\u003eThis pre-lightened Rocket Piston is a good choice for anyone running a high-speed SSG or DSG.\u003c\/p\u003e\n\n\u003cp\u003eGearbox mistiming (pre-engagement) can crash the piston and\/or gear train. A lightened piston accelerates faster, which can eliminate or reduce pre-engagement depending on the setup used. Also, since the piston is lighter, pickup stress is reduced as well.\u003c\/p\u003e\n\n\u003cp\u003eAs a result of these benefits, lightening the piston has been a common modification for enthusiasts.\u003c\/p\u003e\n\n\u003cp\u003eAll of the holes on these pistons were drilled with a drill press. Some material residue may be left over from the drilling and should be cleaned by the end user with sandpaper.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, Rocket has shortened the rear tooth half way. This can correct AoE on some gearboxes, but others may require a little bit more material to be removed.\u003c\/p\u003e\n\n\u003cp\u003eThe nylon material has superior wear resistance and can endure much more prolonged stress than most standard Pistons.\u003c\/p\u003e\n\n\u003cp\u003eFull Metal Rack Pistons are recommended for high ROF or high FPS builds. Even if the rest of the internals are unchanged, a Full Metal Rack Piston will retain its shape and won't wear down nearly as fast nor as often as most plastic pistons.\u003c\/p\u003e\n\n\u003cp\u003eSecuring the rack with a durable epoxy is recommended.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357584793693,"sku":"PIS145L","price":11.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7036.jpg?v=1701442060"},{"product_id":"rocket-airsoft-27-piece-shim-set","title":"Rocket Airsoft 27-piece Shim Set","description":"\u003cp\u003eShimming can make or break an AEG. Proper shimming increases reliability, efficiency, and even ROF in some cases. Motors can run cooler when properly shimmed. The Bevel-to-pinion shimming method is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis Shim Set contains ~27 shims.\u003c\/p\u003e\n\n\u003cp\u003eContains ~9x 0.1mm, ~9x 0.15mm, and ~9x0.2mm shims.\u003c\/p\u003e \n\n\u003cp\u003eOctagon: 0.1mm\u003cbr\u003e\nSilver color circle: 0.15mm\u003cbr\u003e\nBrass color circle: 0.2mm\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357584859229,"sku":"SHIM09","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7049.jpg?v=1701442063"},{"product_id":"rocket-airsoft-o-type-mim-steel-pinion-gear","title":"Rocket Airsoft O-type MIM Steel Pinion Gear","description":"\u003cp\u003eSteel material with MIM machining. This O-type pinion gear can be pressed onto O-type and D-type shafts. Loctite 638 or JB Weld is recommended ensure that the pinion is secure.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357584957533,"sku":"PIN003","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/rocketdtypepinion.jpg?v=1701442068"},{"product_id":"rocket-airsoft-long-vented-high-torque-motor-w-fan-cnc-endbell","title":"Rocket Airsoft Long Vented High Torque Motor w\/ Fan \u0026 CNC Endbell","description":"\u003cp\u003eThis upgraded motor from Rocket Airsoft has material and design differences which make it stand out from their ordinary line of brushed motors.\u003c\/p\u003e\n\n\u003cp\u003eThe most notable of these changes are the ventilation holes and the fan on the motor armature. The fan rotates with the armature, forcing heat to be expelled through the ventilation holes.\u003c\/p\u003e\n\n\u003cp\u003eThe endbell is made of CNC-machined aluminum, making it less prone to deformation and damage.\u003c\/p\u003e\n\n\u003cp\u003eThe magnets are strong and are placed very close to the armature. The armature itself is shimmed tightly with minimal axial play. Because the shaft is D-type, the pinion slipping downward is not a concern with these motors.\u003c\/p\u003e\n\n\u003cp\u003eProduct specifications:\u003c\/p\u003e\n\n\u003cp\u003eD-Type pinion gear\u003cbr\u003e\nBall Bearing metal tower\u003cbr\u003e\nStrong Neodymium magnets\u003cbr\u003e\nVentilated motor can\u003cbr\u003e\nArmature-mounted fan\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612351581,"sku":"MOTHT9","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/RAMOTHT9.jpg?v=1701442690"},{"product_id":"rocket-airsoft-nylon-sector-delayer-chip","title":"Rocket Airsoft Nylon Sector Delayer Chip","description":"\u003cp\u003eA Sector Chip further retracts the Tappet Plate during a gearbox cycle. This ensures that your BB's feed properly at higher rates of fire. The Nylon fiber plastic material is strong, but means this chip has less wear resistance than the metal one. However, it may also result in less tappet wear. This Chip may need some slight sanding on the cam contact point to fit snugly. May have some plastic flashing from manufacturing.\u003c\/p\u003e\n\n\u003cp\u003eIf the sector gear already has an enlarged tappet cam, this delayer chip may not be compatible.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612449885,"sku":"DEPL01","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/RADEPL01new.jpg?v=1701442693"},{"product_id":"rocket-airsoft-12-65-1-high-speed-steel-gears","title":"Rocket Airsoft 12.65:1 High Speed Steel Gears","description":"\u003cp\u003eThis Gear Set has a true ratio of 12.65:1 and a nominal (advertised) ratio of 12:1. This is a high-speed Gearset that will grant great trigger response and speed. Paired with the right parts, this Gearset will give you a fearsome rate of fire.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612482653,"sku":"GEAR12","price":21.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7015.jpg?v=1701442695"},{"product_id":"rocket-airsoft-13-65-1-high-speed-steel-gears","title":"Rocket Airsoft 13.65:1 High Speed Steel Gears","description":"\u003cp\u003eThis Gear Set has a true ratio of 13.65:1 and a nominal (advertised) ratio of 13:1. This is a high-speed Gearset that will grant great trigger response and speed. Paired with the right parts, this Gearset will give you a fearsome rate of fire.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612548189,"sku":"GEAR13","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7016.jpg?v=1701442696"},{"product_id":"rocket-airsoft-17-28-1-steel-gears","title":"Rocket Airsoft 17.28:1 Steel Gears","description":"\u003cp\u003eThis Gear Set has a true ratio of 17.28:1 and a nominal (advertised) ratio of 16:1. This gearset runs slightly faster than most stock gears, so it's a perfect replacement if your old gears are worn or broken.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e \n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612580957,"sku":"GEAR16","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7017.jpg?v=1701442698"},{"product_id":"rocket-airsoft-18-1-sr25-steel-gears","title":"Rocket Airsoft 18:1 SR25 Steel Gears","description":"\u003cp\u003eThis is a SR25 Gearset with 19 sector gear teeth. It's designed for use with elongated pistons.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are fully CNC machined in this gear set, which is apparent with tooling marks. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e \n\n\u003cp\u003eAll of the shafts on these new gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, Rocket Airsoft uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eThese gears have a bearing as a delayer.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612646493,"sku":"GEAR25","price":21.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7025.jpg?v=1701442700"},{"product_id":"rocket-airsoft-18-72-1-standard-ratio-steel-gears","title":"Rocket Airsoft 18.72:1 Standard Ratio Steel Gears","description":"\u003cp\u003eThis Gear Set has a true ratio of 18.72:1 and a nominal (advertised) ratio of 18:1. This gearset runs at the same speed as most stock gears, so it's a perfect replacement if your old gears are worn or broken.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are fully CNC machined in this gear set, which is apparent with tooling marks. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eAll of the shafts on these new gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, Rocket Airsoft uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612679261,"sku":"GEAR18","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7018.jpg?v=1701442702"},{"product_id":"rocket-airsoft-32-1-high-torque-steel-gears","title":"Rocket Airsoft 32:1 High Torque Steel Gears","description":"\u003cp\u003eThis Gear Set has an advertised ratio of 32:1. This is a high-torque Gearset that will reduce strain on the motor and can allow the user to pull very strong springs.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: These gears require a half-rack, high-torque piston. Other modifications may be necessary for fitting the gears in the gearbox shell.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612712029,"sku":"GEAR32","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7024.jpg?v=1701442704"},{"product_id":"rocket-airsoft-24-1-helical-high-torque-steel-gears","title":"Rocket Airsoft 24:1 Helical High Torque Steel Gears","description":"\u003cp\u003eThis Gear Set has an advertised ratio of 24:1. This is a high-torque Gearset that will reduce strain on the motor and can allow the user to pull very strong springs.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612777565,"sku":"GEAR24","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7020.jpg?v=1701442706"},{"product_id":"rocket-airsoft-26-1-helical-high-torque-steel-gears","title":"Rocket Airsoft 26:1 Helical High Torque Steel Gears","description":"\u003cp\u003eThis Gear Set has an advertised ratio of 26:1. This is a high-torque Gearset that will reduce strain on the motor and can allow the user to pull very strong springs.\u003c\/p\u003e\n\n\u003cp\u003eThe Sector and Step gears are now fully CNC machined, and CNC tooling marks make this very apparent. In addition to this, all of the Gears are thoroughly steam treated with black oxide. This gives all of the gears improved wear and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe shafts on these gears are totally filled and reinforced. This strengthens the Gears and reduces the chance of the gears separating.\u003c\/p\u003e\n\n\u003cp\u003eThe Bevel Gear is still MIM machined, but it is still enhanced due to the black oxide coating and filled shaft.\u003c\/p\u003e\n\n\u003cp\u003eAlso, this set uses standard 10-tooth bevel gears. This means that replacements are easy to find and any random 10-tooth bevel gear should be compatible with this Gear Set.\u003c\/p\u003e\n\n\u003cp\u003eNote: these gears come oiled in their packaging. The oil is for corrosion resistance during storage, and should not be used as a lubricant. The gears should be cleaned of oil and coated in a proper lubricating grease upon installation.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612843101,"sku":"GEAR26","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7021.jpg?v=1701442709"},{"product_id":"rocket-airsoft-m-block-clamp-for-v2-gearboxes","title":"Rocket Airsoft M-Block Clamp for V2 Gearboxes","description":"\u003cp\u003eWhen an AEG fires, the piston slams forward into the Cylinder head. Some V2 Gearboxes can split and crack towards the front end due to this repeated stress.\u003c\/p\u003e\n\u003cp\u003eThe purpose of this part is to help prevent the front gearbox end from cracking off. It does this by filling in the negative space around the Hop-Up chamber. When the AEG is firing with the clamp installed, the clamp transfers energy and keeps the front end in place.\u003c\/p\u003e\n\u003cp\u003eInterestingly, this clamp may allow the Gearbox to keep functioning even with a frontal crack, as it can prevent the front end from separating entirely. However, it's still recommended to change the Gearbox if a crack occurs.\u003c\/p\u003e\n\u003cp\u003eThe Rocket Airsoft Clamp is made of T6 CNC Anodized aluminum for strength and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThe Clamp should be compatible with most V2 replicas. It is not compatible with 2-piece Hop-Up chambers. It is probably not compatible with any Rotary chambers.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation is simple: place in the proper position and tighten the screws with an allen key enough to keep the block in place. Wires will have to be routed around the chamber and M-block if the replica is front-wired. The Rocket Airsoft M-block has been revised to make wire routing easier.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612875869,"sku":"RO-12","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7026.jpg?v=1701442711"},{"product_id":"rocket-airsoft-14-5-tooth-full-metal-rack-piston","title":"Rocket Airsoft 14.5-tooth Full Metal Rack Piston","description":"\u003cp\u003eThis is a Rocket Airsoft 14.5-tooth full metal rack piston. The body material is glass-fiber reinforced nylon and the teeth are MIM steel. The nylon material has superior wear resistance and can endure much more prolonged stress than most standard Pistons.\u003c\/p\u003e\n\n\u003cp\u003eThe rear tooth is reduced to half its original height. This can correct AoE on some gearboxes, but others may require more material to be removed.\u003c\/p\u003e\n\n\u003cp\u003eEven if the gearbox is left stock, a Full Metal Rack Piston is more likely to retain its shape and won't wear down nearly as fast nor as often as most plastic pistons.\u003c\/p\u003e\n\n\u003cp\u003eSecuring the rack with a durable epoxy is recommended.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357612941405,"sku":"PIS1405","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/RAPIS1405.jpg?v=1701442714"},{"product_id":"rocket-airsoft-8mm-steel-bearings","title":"Rocket Airsoft 8mm Steel Bearings","description":"\u003cp\u003eChinese manufactured full steel bearings. These bearings offer moderate durability \u0026amp; performance at a reasonable price.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357613006941,"sku":"BEA08","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7041.jpg?v=1701442716"},{"product_id":"rocket-airsoft-v3-ak-double-o-ring-cylinder-head","title":"Rocket Airsoft V3 AK Double O-ring Cylinder Head","description":"\u003cp\u003eThis is a 7075 CNC Machined Cylinder Head by Rocket Airsoft.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Piston assembly is constantly slamming against the Cylinder Head during a gearbox cycle, the Cylinder Head endures a lot of stress. Plastic Cylinder Heads tend to crack and fail over time as a result of these stressors. Unlike stock plastic Cylinder Heads, this unit is built from high-grade aluminum and can withstand the strongest of springs.\u003c\/p\u003e\n\n\u003cp\u003eDue to the dual O-ring design, this Cylinder Head makes an excellent seal. Having good compression in your gun improves efficiency and accuracy.\u003c\/p\u003e\n\n\u003cp\u003eUnlike some V3 Cylinder Heads, this part does not have a front protruding \"face\", which makes it compatible with more Gearboxes.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357613072477,"sku":"CH03P","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7038.jpg?v=1701442719"},{"product_id":"rocket-airsoft-8mm-steel-cnc-machining-bushings","title":"Rocket Airsoft 8mm Steel CNC Machining Bushings","description":"\u003cp\u003eThese bushings are a step up from standard PIM ones. They have had CNC machining involved in their manufacturing, and the bushings are also coated in black oxide for durability and corrosion resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe flanges are thin, measuring at .68mm. The thin flanges allow for better compatibility between gearboxes and for more shims to be used.\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":41357613138013,"sku":"BUS08","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/products\/DSF7029.jpg?v=1701442721"},{"product_id":"rocket-airsoft-d-type-pinion-gear","title":"Rocket Airsoft D-Type Pinion Gear","description":"\u003cp\u003eSteel material with MIM machining. This D-type pinion gear can be pressed onto D-type shafts. Loctite 638 or JB weld is recommended ensure that the pinion is secure. A 0.05\" (1.27mm) Hex Key is needed to secure the grub screw.\u003cbr\u003e\u003c\/p\u003e","brand":"Rocket Airsoft","offers":[{"title":"Default Title","offer_id":42135638900829,"sku":"RA-D","price":4.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/files\/DSF7755.jpg?v=1715072827"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1008\/4957\/collections\/Rocket_Airsoft.jpg?v=1706278358","url":"https:\/\/brillarmory.com\/collections\/rocket-airsoft\/clearance.oembed","provider":"BRILL ARMORY","version":"1.0","type":"link"}