Home| Brill Armory / BSI INSTA-CURE Super Thin CA Glue 1/2oz

Manufactured by: Bob Smith Industries

Brill Armory / BSI INSTA-CURE Super Thin CA Glue 1/2oz

Manufactured by: Bob Smith Industries

Brill Armory / BSI INSTA-CURE Super Thin CA Glue 1/2oz

Weight: 0.1 lb

Model: BSI-101

$5.00
$5.00
Sale
8
In Stock
product details

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Works Best On:

    Balsa Wood
    Ceramics

Works Good On:

    Soft Wood
    Fiberglass
    Hard Plastics
    Water-Resistant
    CA Hinges

Directions: Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.

WARNING: BONDS SKIN INSTANTLY. EYE & RESPIRATORY IRRITANT

View the manufacturers page for safety information.

product details

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Works Best On:

    Balsa Wood
    Ceramics

Works Good On:

    Soft Wood
    Fiberglass
    Hard Plastics
    Water-Resistant
    CA Hinges

Directions: Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.

WARNING: BONDS SKIN INSTANTLY. EYE & RESPIRATORY IRRITANT

View the manufacturers page for safety information.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

manufacturers

ACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BB BastardBioshotBlackTalon Co...BRILL ARMORYCHEMIS CYMADKT BrandDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMaple Airsoft...ModifyNorthern Hurr...PDIPerun AirsoftPolarStar Air...PPSProfessional ...ProWinRetro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TruSight Airs...W.S. Deans Co.Warhead Indus...XcortechZCI