Categories

Information

Home| da Vinci Airsoft SUS304 05 Raizen AEG Inner Barrel for TM NGRS and EVOLT - 229mm

Manufactured by: da Vinci Airsoft

da Vinci Airsoft SUS304 05 Raizen AEG Inner Barrel for TM NGRS and EVOLT - 229mm (4580717523437)

Manufactured by: da Vinci Airsoft

da Vinci Airsoft SUS304 05 Raizen AEG Inner Barrel for TM NGRS and EVOLT - 229mm (4580717523437)

Weight: 0.35 lb

Model: 4580717523437

$64.00
$64.00
5
In Stock
product details

MADE FOR TM NGRS & EVOLT AEG

Raizen is made of the finest quality Stainless Steel in Japan. We’ve used this material for 20 years to create the best barrel.

Raizen has a deeply tapered muzzle end. The tapered muzzle results in better accuracy & FPS.

Dia. : 6.05mm
Outer Dia. :  8.55mm


Dia. : 6.05mm Outer Dia. :  8.55mm HOP window length 6mm 6.05mm is good balance, not too tight & too loose bore.

Stainless steel is the most precise material. This material has +-0.005mm tolerance.

It’s the finest quality in Japan (I can say in the world) Also Tokyo Marui original bore is approximately 6.08mm so compared to Marui, 6.05mm is a tight bore.

It has a little clearance between BB & wall. So BB is reduced touches of the wall when going through the barrel. So less friction ＆ unnecessary spin , Consequently accuracy will be improved.

The chamber has a "W" cut. This eases installation of the packing/bucking and can prevent damage.

Machined and chamfered precisely so you can push the barrel completely into the Hop-Up chamber.

product details

MADE FOR TM NGRS & EVOLT AEG

Raizen is made of the finest quality Stainless Steel in Japan. We’ve used this material for 20 years to create the best barrel.

Raizen has a deeply tapered muzzle end. The tapered muzzle results in better accuracy & FPS.

Dia. : 6.05mm
Outer Dia. :  8.55mm


Dia. : 6.05mm Outer Dia. :  8.55mm HOP window length 6mm 6.05mm is good balance, not too tight & too loose bore.

Stainless steel is the most precise material. This material has +-0.005mm tolerance.

It’s the finest quality in Japan (I can say in the world) Also Tokyo Marui original bore is approximately 6.08mm so compared to Marui, 6.05mm is a tight bore.

It has a little clearance between BB & wall. So BB is reduced touches of the wall when going through the barrel. So less friction ＆ unnecessary spin , Consequently accuracy will be improved.

The chamber has a "W" cut. This eases installation of the packing/bucking and can prevent damage.

Machined and chamfered precisely so you can push the barrel completely into the Hop-Up chamber.

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearChaos AdvancedCHEMIS da Vinci AirsoftDream ArmyDUALSKYEagle6 AirsoftEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronJVANLambda AirsoftLaylaxLCTLonexMaekiiiMancraft AirsoftMaple Airsoft...Maple LeafMaxxModifyNexxSpeedNorthern Hurr...Northmark VaultOrga AirsoftPDIPerun AirsoftPolarStar Air...Professional ...Real SwordRetro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...WyshtechZCI