Categories

Information

Manufactured by: Eagle6 Airsoft

Eagle6 Airsoft - M95 Spring For TM NGRS (E6-NG-M95)

Manufactured by: Eagle6 Airsoft

Eagle6 Airsoft - M95 Spring For TM NGRS (E6-NG-M95)

Weight: 0.03 lb

Model: E6-NG-M95

Regular price $16.00
$16.00 Sale price Regular price
4
In Stock
product details

Although standard AEG springs can work with TM Next-Gen Gearboxes, shorter and stronger springs like these Eagle6 ones are ideal. These springs are very well made and are trusted among technicians who specialize in TM Next-Gen AEG's.

This spring is specifically designed for the Next generation AEG's from Tokyo Marui which use a shorter than normal AEG spring. Using an oversized AEG spring in one of these gearbox's will cause excess wear to your stock tube threads or poor cycling / reduced battery efficiency. These springs are Heat treated 3 times and use high-quality steel and are Made in England. These Springs are tested every 10 springs and measured for consistency during a batch manufacturing process. These are also deliberately made as a linear spring for a more consistent fps reading shot to shot.

There are two key factors we try and eliminate with our springs, Settling period and Variance. Settling is how a spring changes after a period of time in your AEG. We have removed massive amounts of this with 3 separate heat treatments. In essence, we have pre settling the spring for you then we test its power. This leads us to variance. We choose a high-quality steel and linear design to keep average variance within an 8% tolerance margin. Non-Linear designs power can only be calculated on an average over a spring length adding more chance for variance in production. I.e. spring 1 in a batch maybe 90NM and spring 100 could be NM. We check our springs every 10 springs then do a spring load test on 6 randomly picked springs at the end of production. We aim for a tolerance better than 8% across 6 tested springs. Of course, we are always looking at improving this but we find we have found a good result VS cost of production.

This spring will fit all Next Generation Recoil Shock AEG's

- M95 Rating, this will give between 320 - 340 FPS*
- Made with high-quality steel
- Heat Treated
- Measured every 10 springs
- Linear Spring For Increased Consistency
- Designed specifically for the Next Gen Recoil Shock AEG Range
- Ground Ends For Increased Consistency

*Tech note - FPS results vary between guns and depending on upgrades. We do a full range of springs so you can change up or down if you aren't getting the results you desire.

product details

Although standard AEG springs can work with TM Next-Gen Gearboxes, shorter and stronger springs like these Eagle6 ones are ideal. These springs are very well made and are trusted among technicians who specialize in TM Next-Gen AEG's.

This spring is specifically designed for the Next generation AEG's from Tokyo Marui which use a shorter than normal AEG spring. Using an oversized AEG spring in one of these gearbox's will cause excess wear to your stock tube threads or poor cycling / reduced battery efficiency. These springs are Heat treated 3 times and use high-quality steel and are Made in England. These Springs are tested every 10 springs and measured for consistency during a batch manufacturing process. These are also deliberately made as a linear spring for a more consistent fps reading shot to shot.

There are two key factors we try and eliminate with our springs, Settling period and Variance. Settling is how a spring changes after a period of time in your AEG. We have removed massive amounts of this with 3 separate heat treatments. In essence, we have pre settling the spring for you then we test its power. This leads us to variance. We choose a high-quality steel and linear design to keep average variance within an 8% tolerance margin. Non-Linear designs power can only be calculated on an average over a spring length adding more chance for variance in production. I.e. spring 1 in a batch maybe 90NM and spring 100 could be NM. We check our springs every 10 springs then do a spring load test on 6 randomly picked springs at the end of production. We aim for a tolerance better than 8% across 6 tested springs. Of course, we are always looking at improving this but we find we have found a good result VS cost of production.

This spring will fit all Next Generation Recoil Shock AEG's

- M95 Rating, this will give between 320 - 340 FPS*
- Made with high-quality steel
- Heat Treated
- Measured every 10 springs
- Linear Spring For Increased Consistency
- Designed specifically for the Next Gen Recoil Shock AEG Range
- Ground Ends For Increased Consistency

*Tech note - FPS results vary between guns and depending on upgrades. We do a full range of springs so you can change up or down if you aren't getting the results you desire.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Categories

Information