Categories

Information

Home| Eagle6 Airsoft - TM Electric Shotgun Series M95 Spring

Manufactured by: Eagle6 Airsoft

Eagle6 Airsoft - TM Electric Shotgun Series M95 Spring (E6-AES-M95)

Manufactured by: Eagle6 Airsoft

Eagle6 Airsoft - TM Electric Shotgun Series M95 Spring (E6-AES-M95)

Weight: 0.03 lb

Model: E6-AES-M95

$16.00
$16.00
5
In Stock
product details

Manufacturer notes:

This spring is specifically designed for the Automatic Electric Shotgun Series from Tokyo Marui which use longer & stronger than normal AEG springs in their gearbox. Using normal AEG springs in one of these gearboxes could cause damage to your piston or other internals. These springs are Heat treated, use high-quality steel, and are made in England. These Springs are tested every 10 springs and measured for consistency during the manufacturing process. These are also deliberately made as a linear spring for a more consistent fps reading shot-to-shot.

This M90 Spring will produce around 330 fps. Testing yielded very minor effects on ROF and Trigger response, as with any UPGRADING though when you increase one thing, sometimes you need to increase other things like motor strength, battery power and or consider replacing the MOSFET with one from GATE ELECTRONICS.

**Tech note - FPS results may vary between guns and depend on upgrades, hop rubbers and air seals. We do a full range of springs with consistent power increases so you can change up or down if you aren't getting the results you desire**

**Tech note - FPS results may vary between guns and depend on upgrades, hop rubbers and air seals. We do a full range of springs with consistent power increases so you can change up or down if you aren't getting the results you desire**

Confirmed To Fit -

Tokyo Marui - AA12 Automatic Electric Shotgun Series

Tokyo Marui - SGR12 Automatic Electric Shotgun Series

If you know other fitments for this product please email to let us know.

Installation Disclaimer -

Installing/fitting Airsoft gun parts will need varying knowledge from basic to advanced. Please refer to your local Airsoft Gunsmith for proper installation/fitting advise. Experienced fitting may be needed for some part's as the condition/compatibility of each Airsoft gun might vary and incorrect assembly can lead to premature failure of parts which is not our responsibility.

- M95, This will give around 330 FPS.

- Made with high-quality steel

- Heat Treated

- Measured every 10 springs

- Linear Spring For Increased Consistency

- Designed specifically for the Automatic Electric Shotgun Range

- Ground Ends For Increased Consistency

product details

Manufacturer notes:

This spring is specifically designed for the Automatic Electric Shotgun Series from Tokyo Marui which use longer & stronger than normal AEG springs in their gearbox. Using normal AEG springs in one of these gearboxes could cause damage to your piston or other internals. These springs are Heat treated, use high-quality steel, and are made in England. These Springs are tested every 10 springs and measured for consistency during the manufacturing process. These are also deliberately made as a linear spring for a more consistent fps reading shot-to-shot.

This M90 Spring will produce around 330 fps. Testing yielded very minor effects on ROF and Trigger response, as with any UPGRADING though when you increase one thing, sometimes you need to increase other things like motor strength, battery power and or consider replacing the MOSFET with one from GATE ELECTRONICS.

**Tech note - FPS results may vary between guns and depend on upgrades, hop rubbers and air seals. We do a full range of springs with consistent power increases so you can change up or down if you aren't getting the results you desire**

**Tech note - FPS results may vary between guns and depend on upgrades, hop rubbers and air seals. We do a full range of springs with consistent power increases so you can change up or down if you aren't getting the results you desire**

Confirmed To Fit -

Tokyo Marui - AA12 Automatic Electric Shotgun Series

Tokyo Marui - SGR12 Automatic Electric Shotgun Series

If you know other fitments for this product please email to let us know.

Installation Disclaimer -

Installing/fitting Airsoft gun parts will need varying knowledge from basic to advanced. Please refer to your local Airsoft Gunsmith for proper installation/fitting advise. Experienced fitting may be needed for some part's as the condition/compatibility of each Airsoft gun might vary and incorrect assembly can lead to premature failure of parts which is not our responsibility.

- M95, This will give around 330 FPS.

- Made with high-quality steel

- Heat Treated

- Measured every 10 springs

- Linear Spring For Increased Consistency

- Designed specifically for the Automatic Electric Shotgun Range

- Ground Ends For Increased Consistency

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearCHEMIS CYMAda Vinci AirsoftDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMancraft AirsoftMaple Airsoft...Maple LeafMaxxModifyNorthern Hurr...Orga AirsoftParagon ArmoryPDIPerun AirsoftPolarStar Air...Professional ...Retro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...ZCI