Categories

Information

Home| F.L.T. 5.9mm CNC Steel Bushings for TM NGRS

Manufactured by: Field Limit Tuning

F.L.T. 5.9mm CNC Steel Bushings for TM NGRS (FLT59)

Manufactured by: Field Limit Tuning

F.L.T. 5.9mm CNC Steel Bushings for TM NGRS (FLT59)

Weight: 0.03 lb

Model: FLT59

$20.00
$20.00
30
In Stock
product details

These bushings meet and exceed the standards of discerning Airsmiths.

F.L.T. bushings are CNC machined from high-speed steel and burnished in a vibratory tumbler to eliminate any peaks or high spots that may cause damage to gear axles. These new F.L.T. bushings also have the gear axel openings reamed. The bushings are porous on the outside but smooth on the inside, which allows for smooth gear axle operation and better adhesion if the user wants to glue the bushings into a gearbox shell. The manufacturing process is superior to the standard sintering or PIM process that most Airsoft bushings undergo.

Most bushings on the market have an HRC of 25-35. These F.L.T. bushings have a Rockwell hardness of 50-55. These bushings also have a low profile to allow for proper gear clearance and shimming.

In addition, the bushings are coated in silicone oil to prevent rusting during shipment and storage. Please note that this oil is not intended to be used as a lubricant. Remove the silicone oil during installation and use a lubricating grease instead.

These new F.L.T. bushings have the openings reamed. There is some surface oxidation due to handling and does not hinder performance. A high-quality grease is recommended for these bushings.

These bushings are recommended, especially for those running high-stress builds.

Flange thickness: 0.56mm

product details

These bushings meet and exceed the standards of discerning Airsmiths.

F.L.T. bushings are CNC machined from high-speed steel and burnished in a vibratory tumbler to eliminate any peaks or high spots that may cause damage to gear axles. These new F.L.T. bushings also have the gear axel openings reamed. The bushings are porous on the outside but smooth on the inside, which allows for smooth gear axle operation and better adhesion if the user wants to glue the bushings into a gearbox shell. The manufacturing process is superior to the standard sintering or PIM process that most Airsoft bushings undergo.

Most bushings on the market have an HRC of 25-35. These F.L.T. bushings have a Rockwell hardness of 50-55. These bushings also have a low profile to allow for proper gear clearance and shimming.

In addition, the bushings are coated in silicone oil to prevent rusting during shipment and storage. Please note that this oil is not intended to be used as a lubricant. Remove the silicone oil during installation and use a lubricating grease instead.

These new F.L.T. bushings have the openings reamed. There is some surface oxidation due to handling and does not hinder performance. A high-quality grease is recommended for these bushings.

These bushings are recommended, especially for those running high-stress builds.

Flange thickness: 0.56mm

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearCHEMIS CYMAda Vinci AirsoftDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMancraft AirsoftMaple Airsoft...Maple LeafMaxxModifyNorthern Hurr...Orga AirsoftParagon ArmoryPDIPerun AirsoftPolarStar Air...Professional ...Retro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...ZCI