TRIGGER SENSITIVITY
Thanks to the magnet adapter, it is possible to adjust the trigger sensitivity from the app.
The adapter can be used on standard V2 triggers.
For Jefftron triggers use this adapter.
FIRE MODES
This feature allows you to configure firing modes and assign the mode to the position of the firing switch on the weapon. The configurable firing modes available on the Scylla are:
- SAFE: no responding on the trigger pull.
- Semi: it fires a single shot per trigger pull.
- Binary trigger: it fires a single shot when the trigger is pulled and another single shot when it is released.
- Burst: gun shoot burst per trigger pull.
- Burst/Full: short trigger press fires burst, long trigger press makes auto fire.
- Full: gun makes auto fire until releasing trigger.
RATE OF FIRE REDUCTION
Whether you need to lower your cadence because your pitch has a RoF limit you are not HAVE or you need to diagnose a problem, Scylla eats you. With this feature, you can adjust your rate of fire between 40% and 100% via the app.
ACTIVE BRAKE
When you are using weak spring, inconsistency can occur when firing single shots, such as double burst fire in one trigger pull - the active brake solves this problem by braking the motor after each shot. You can set it in the application from 0 to 100%.
PISTON PRECOCKING
Piston precocking improves trigger response by leaving the piston in the rear position after each shot. This means that the motor does not have to retract and then release the piston each time it fires, it just releases the piston. It only works in SEMI mode. The intensity is set in the app from 0 to 80%.
ELECTRONIC FUSE
Protects the device in case of a short circuit on the wires to the motor.
LI-PO ALARM
Indication of low battery voltage. If the battery is discharged below a certain voltage, the weapon will emit an audible signal that the battery needs to be replaced. The app automatically detects the battery, or you can choose the correct battery type yourself.
STATISTICS
The app offers a lot of stats and indicators that allow you to get the most out of your weapon.
Among the most important are:
- Weapon rate of fire
- Total number of shots fired
- Cycle time
- Current during firing
- Temperature of the mosfet and processor
- Time how long the Scylla ran
- Battery voltage
USE WITH BRUSHLESS MOTOR
Scylla can be used with brushless motor (Warhead, Option No. 1, etc.). Activate the function "Brushless motor" in the Leviathan & Scylla app and use all available options without any worries.
FEATURES
Easy installation into the mechabox.
Wrapped in lacquer to protect the device against water damage.
You can use a mechanical trigger stop with the Scylla, however it does not have to be used.
PACKING
Scylla - V2 drop-in electronic module with wiring to stock with T-plug connector
Adapter with magnet for standard trigger
Screw for securing device in the gearbox
2pcs wires holders
5x Scylla sticker
Dog Tag keychain
Online manual in English
WIRING CONNECTION INTO THE STOCK: