Complete wiring is designed for airsoft replica AK family with battery above the gearbox (under the dust cover).
Everything is ready, just solder the loose wires to the original trigger contacts in the gun.
The Micro mosfet III is integrated into the T-plug connector so it takes up minimal space.
MOSFET BENEFITS:
- Increases gun rate of fire and battery holds longer, than with basic wiring.
- Designed for spring up to M170 (equivalent for current 90A single shot fire or 35A burst fire for max. 30s).
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- No current consumption in the idle mode
- No sparking on switch contacts
- Board covered by conformal coating, it protect it against water
SPECIFICATIONS:
- AK mosfet is suitable for installation with original V3 contacts in AK47 or AK74 airsoft gun, which are accessible from outside of mechabox
- The complete wiring allows quick and easy installation into the weapon, it is designed for all types of AK weapons with the battery located above the mechabox (under the dust cover)
- There are high quality powerwires 1,5 qmm (AWG16) with with thin and hard MPPE insulation and signal blue wire 0.34 qmm (AWG22) with MPPE insulation
- In auto fire mode piston stops in random position due the gearbox design
- For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox
DEVICE INSTRUCTIONS: you can download installation manual in English here [PDF, 569.46 kB]
PACKING:
- Micro mosfet III soldered on T-Plug connector with complete wiring for battery above gearbox AK47 or AK74
- 2x black heat shrink tube for overlapping the switch contacts
- Installation manual in English
ALTERNATIVES:
- More features with settings via app in the smartphone Leviathan-V3 optical
- Fully integrated Mosfet-V3 inside the gearbox version 3 instead of the original trigger contacts
- If you want to use your own wires, choose Micro mosfet III without wiring
- If you need a different wire length, select Micro mosfet II with wiring
- For higher loads and RoF, please choose Mosfet II or its variant with wiring
WARNING:
Installation of this device leave to the expert, who could solder and disassemble airsoft gun. Never use a soldering gun!
We can't guarantee 100% compatibility with all gearboxes, but AK mosfet will fit into standard and common brand's gearboxes without modifications.
WIRING CONNECTION INTO THE GUN:
