Manufactured by: Maekiii

Maekiii Motor Tower - 9.6mm

Manufactured by: Maekiii

Maekiii Motor Tower - 9.6mm

Weight: 0.01 lb

Model: MTOWER96

Regular price $6.00
$6.00 Sale price Regular price
Sale
42
In Stock
product details
Stock motor shaft bearings are often too loosely fitted to the gearbox, resulting in pinion misalignment and suboptimal meshing between the pinion and bevel gear. By having a more precisely fitted shaft bearing between the motor and gearbox shell, this issue is mitigated, resulting in better efficiency of the gear train and reduction of noise generated. NOTE: Bevel gear will need to be shimmed a bit higher comparing to loose shaft bearings. For long type motors only. Measure the opening in your gearbox shell with a caliper and pick according size. For example, if the opening is 9.75mm, pick 9.6mm. Most stock shaft bearings have 2pcs of 1/8" x 1/4" x 7/64" size ball bearings in them, take them from that and install into this. The same size bearing can also be found from motor end bells once disassembled.

product details

Stock motor shaft bearings are often too loosely fitted to the gearbox, resulting in pinion misalignment and suboptimal meshing between the pinion and bevel gear. By having a more precisely fitted shaft bearing between the motor and gearbox shell, this issue is mitigated, resulting in better efficiency of the gear train and reduction of noise generated. NOTE: Bevel gear will need to be shimmed a bit higher comparing to loose shaft bearings. For long type motors only. Measure the opening in your gearbox shell with a caliper and pick according size. For example, if the opening is 9.75mm, pick 9.6mm. Most stock shaft bearings have 2pcs of 1/8" x 1/4" x 7/64" size ball bearings in them, take them from that and install into this. The same size bearing can also be found from motor end bells once disassembled.