Categories

Information

Home| Retro ARMS 14.5T Piston

Manufactured by: Retro ARMS

Retro ARMS 14.5T Piston (RETRO-6696)

Manufactured by: Retro ARMS

Retro ARMS 14.5T Piston (RETRO-6696)

Weight: 0.08 lb

Model: RETRO-6696

$20.00
$20.00
33
In Stock
product details

Retro ARMS has reworked and redesigned these AEG pistons in a new material.

The Piston uses a true 14.5-tooth (including pickup tooth) design. This will allow for corrected AoE in the vast majority of Gearboxes, although some gearboxes may require a little more material to be removed.

The metal racks are visually straighter than most China-manufactured pistons. The rack sits very firmly inside the piston body and likely require a lot of force to remove.

Weight: 16.91g
Length: 66.56mm
Width (excluding rails): 18.55mm
Total Width (including rails): 22mm
Height (inlcuding main teeth): 20.84mm
Height (just body): 19.3mm
Height (pickup tooth & body -- the tallest area of the piston): 21.12mm

This piston has a narrow inner diameter at 15.4mm, so it may not be compatible with some thrust bearings.

product details

Retro ARMS has reworked and redesigned these AEG pistons in a new material.

The Piston uses a true 14.5-tooth (including pickup tooth) design. This will allow for corrected AoE in the vast majority of Gearboxes, although some gearboxes may require a little more material to be removed.

The metal racks are visually straighter than most China-manufactured pistons. The rack sits very firmly inside the piston body and likely require a lot of force to remove.

Weight: 16.91g
Length: 66.56mm
Width (excluding rails): 18.55mm
Total Width (including rails): 22mm
Height (inlcuding main teeth): 20.84mm
Height (just body): 19.3mm
Height (pickup tooth & body -- the tallest area of the piston): 21.12mm

This piston has a narrow inner diameter at 15.4mm, so it may not be compatible with some thrust bearings.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
M.T.
Great Pistons!

These pistons of course are a perfect fit in retro arms shells, but the racks have great AOE precuts and the pickup tooth depth doesn't drag against your SHS/Rocket sectors.

They have held up to my DSG and SSG builds beautifully with little to no modifications required during installation, which is a huge plus in my book!

Give them a try if you haven't!:)

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearCHEMIS CYMAda Vinci AirsoftDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMancraft AirsoftMaple Airsoft...Maple LeafMaxxModifyNorthern Hurr...Orga AirsoftParagon ArmoryPDIPerun AirsoftPolarStar Air...Professional ...Retro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...ZCI