Categories

Information

Home| Retro ARMS CNC 21.35mm O-Ring Air Nozzle

Manufactured by: Retro ARMS

Retro ARMS CNC 21.35mm O-Ring Air Nozzle (RETRO-7702)

Manufactured by: Retro ARMS

Retro ARMS CNC 21.35mm O-Ring Air Nozzle (RETRO-7702)

Weight: 0.03 lb

Model: RETRO-7702

$8.00
$8.00
8
In Stock
product details

This is a precision CNC machined Retro ARMS O-Ring Air Nozzle.

This nozzle pairs well with Retro ARMS Cylinder Heads. This Air Nozzle has no thick "collar" which can interfere with some Hop-Up units, and the diameter is 7mm. This Nozzle is made of durable and lightweight 7075 CNC machined Aluminum. The tip end is chamfered for improved sealing.

Brill Armory now sells these Air Nozzles in .05 increments to provide ideal Air sealing and feeding for your specific gearbox.

Ideally, an Air Nozzle should make a good seal with the bucking when the tappet plate at its most forward position. The Air nozzle should not go too far into the bucking or crush it. If the Air nozzle is going too far into the bucking, a shorter Air nozzle should be used instead. Additionally, the Air Nozzle should not obstruct BB's going into the Hop-Up chamber when the Air Nozzle is fully retracted (its most rear position.)

Having a good air seal in your AEG can also increase accuracy and consistency since the FPS variation between shots is minimized.

Silicone oil or grease is preferred for lubricating the O-ring. Do not use lubricants which may degrade rubber seals.

Nozzle diameter: 7mm
Material: 7075 Aluminum

product details

This is a precision CNC machined Retro ARMS O-Ring Air Nozzle.

This nozzle pairs well with Retro ARMS Cylinder Heads. This Air Nozzle has no thick "collar" which can interfere with some Hop-Up units, and the diameter is 7mm. This Nozzle is made of durable and lightweight 7075 CNC machined Aluminum. The tip end is chamfered for improved sealing.

Brill Armory now sells these Air Nozzles in .05 increments to provide ideal Air sealing and feeding for your specific gearbox.

Ideally, an Air Nozzle should make a good seal with the bucking when the tappet plate at its most forward position. The Air nozzle should not go too far into the bucking or crush it. If the Air nozzle is going too far into the bucking, a shorter Air nozzle should be used instead. Additionally, the Air Nozzle should not obstruct BB's going into the Hop-Up chamber when the Air Nozzle is fully retracted (its most rear position.)

Having a good air seal in your AEG can also increase accuracy and consistency since the FPS variation between shots is minimized.

Silicone oil or grease is preferred for lubricating the O-ring. Do not use lubricants which may degrade rubber seals.

Nozzle diameter: 7mm
Material: 7075 Aluminum

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearCHEMIS CYMAda Vinci AirsoftDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMancraft AirsoftMaple Airsoft...Maple LeafMaxxModifyNorthern Hurr...Orga AirsoftParagon ArmoryPDIPerun AirsoftPolarStar Air...Professional ...Retro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...ZCI