Categories

Information

Home| SHS Short High Speed Motor

Manufactured by: SHS

SHS Short High Speed Motor (DJ0007)

Manufactured by: SHS

SHS Short High Speed Motor (DJ0007)

Weight: 0.37 lb

Model: DJ0007

$31.00
$31.00
30
In Stock
product details

Upgrading your motor will boost your rate of fire, improve trigger response, and allow your gearbox to pull stronger springs. These motors are the high-speed type, which will yield more speed and less torque than the neodymium SHS HT motors.

This newest batch of SHS motors looks very promising. The brushes and magnets are shaped to the motor armature out of the box. Because of this, no break-in period is necessary. The armatures are nice and tight; not too much play. The D-type pinion gears look to be of a higher strength material and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, pinion slipping is not a concern with these motors.

The magnets are stronger than most brands, and the retaining ring is made out of metal so it won't strip. These cans are the perfect complement to any armature, so the can is great for building motors of any TPA. Disassembly/reassembly is easy.

product details

Upgrading your motor will boost your rate of fire, improve trigger response, and allow your gearbox to pull stronger springs. These motors are the high-speed type, which will yield more speed and less torque than the neodymium SHS HT motors.

This newest batch of SHS motors looks very promising. The brushes and magnets are shaped to the motor armature out of the box. Because of this, no break-in period is necessary. The armatures are nice and tight; not too much play. The D-type pinion gears look to be of a higher strength material and SHS has epoxied all of them onto the shafts. Because the shaft is D-type, pinion slipping is not a concern with these motors.

The magnets are stronger than most brands, and the retaining ring is made out of metal so it won't strip. These cans are the perfect complement to any armature, so the can is great for building motors of any TPA. Disassembly/reassembly is easy.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
O
O.R.

I currently use one of these motors in a SSG 13:1 ratio speed build. At first, running the stock wiring, this thing would perform great, but would heat up very quickly on semi after continuous use. Changing the wiring harness to 16 ga and putting in a mosfet helped greatly with the heat, and efficiency. Although, expect to burn through batteries more quickly with this one. Based off a 380 fps, 30+ rps set up.

Categories

Information

manufacturers

4UADACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BioshotBRILL ARMORYBullgearCHEMIS CYMAda Vinci AirsoftDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMaple Airsoft...Maple LeafModifyNorthern Hurr...Orga AirsoftParagon ArmoryPDIPerun AirsoftPolarStar Air...PPSProfessional ...Retro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...Silent Indust...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TechTTruSight Airs...Unicorn AirsoftW.S. Deans Co.Warhead Indus...ZCI