Categories

Information

Manufactured by: Siegetek Concepts

Siegetek GEN 3 9-tooth Cyclone Dual Sector Gear (G1T3R2)

Manufactured by: Siegetek Concepts

Siegetek GEN 3 9-tooth Cyclone Dual Sector Gear (G1T3R2)

Weight: 0.06 lb

Model: G1T3R2

Regular price $70.00
$70.00 Sale price Regular price
3
In Stock
 
More payment options

This Gear can yield a ridiculously high rate of fire. It is also exceptionally hard and well-designed.

Installing a DSG Gearset requires technical expertise and fine tuning of the Gearbox. Research and read voraciously to unlock the full potential of these gears. The official DSG instruction manual is a good start: http://www.siegetek.com/instructions/cyclone.pdf

As mentioned in the installation notes, trimming the tappet plate to at least 11mm, and installing a spring guide spacer OR using a strong spring is necessary for installation.

Note: product photo may vary from actual product as these gears are updated with improvements between batches.

We recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.

product details

This Gear can yield a ridiculously high rate of fire. It is also exceptionally hard and well-designed.

Installing a DSG Gearset requires technical expertise and fine tuning of the Gearbox. Research and read voraciously to unlock the full potential of these gears. The official DSG instruction manual is a good start: http://www.siegetek.com/instructions/cyclone.pdf

As mentioned in the installation notes, trimming the tappet plate to at least 11mm, and installing a spring guide spacer OR using a strong spring is necessary for installation.

Note: product photo may vary from actual product as these gears are updated with improvements between batches.

We recommend the Siegetek G4 pinion gear or ASG O-type pinion gear for optimal concentricity and meshing.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
M.H.

Fantastic quality as always, love Riot gears. I had previously built a DSG'd gun, but I always wanted to squeeze a little higher FPS out of it. When I saw the 9-tooth double sector gear, I had to try it. Build: Lonex V2 shell, SHS piston, SHS pom piston head, stock AGM gears (actually have held up for ~1000 rounds now), Lonex tappet plate, Core air nozzle, stock ported cylinder and head. ZCI 22tpa high-torque and Core m170 spring, uncut. Chimera fet and a 11.1v 45c discharge battery. Barrel group: SHS 300mm 6.03 tightbore, prommy flat bucking and prommy bridge nub. Turns out the 300mm barrel isn't over-volumed at all. Performance: Chrono'd at 415fps with an Elite Force .20, 375 with .25s. RPS of about 40-45. I was absolutely blown away by those number. 415 fps out of a DSG! With the old 8-tooth gear, I was pulling about 360 fps (.20) tops with a similar build. I was expecting maybe, 370-380 fps with the added tooth, but not 415... For a low-speed/high-power DSG build, this gear is perfect. Used the gun at an outdoor Op with no issues, and I was never out-ranged once. 10/10 would buy again.

K
K.C.

Love this 9 tooth DSG, for shorter barrels around 200mm, you won't be undervoluming at all. Allows for higher FPS than the 8 tooth as it pulls back the spring a little more...currently getting 315 FPS on an M190 cut 7 coils on an 18:1 setup. Buy it.

Categories

Information