Information

Home| ZCI Complete 8mm V2 M4/AR QD Gearbox (front wired)

Manufactured by: ZCI

ZCI Complete 8mm V2 M4/AR QD Gearbox (front wired) (M-14)

Manufactured by: ZCI

ZCI Complete 8mm V2 M4/AR QD Gearbox (front wired) (M-14)

Name: ZCI Complete 8mm V2 M4/AR QD Gearbox (front wired)
Brand: ZCI
SKU: M-14
Price: 85.0 USD
Availability: InStock

Weight: 1.3 lb

Model: M-14

$85.00

Product variants

In Stock

product details

This is a complete 8mm Quick spring change Gearbox for M4's. It comes with a front wired harness designed for replicas that are wired to the handguard or PEQ box. These Gearboxes are zinc cast like most other Gearboxes but are made to a higher quality standard. These Gearboxes feature a Quick-disconnect spring guide which allows the user to change springs in seconds and allows for much easier maintenance.

Comes with the following parts:

- 21.4mm Aluminum O-ring Air Nozzle
- 18:1 Steel CNC Gears w/ Brass Delayer
- QD Spring Guide
- M120 Spring
- Full Metal Rack Piston
- Aluminum Piston Head w/ Bearings
- Full Stainless Steel Cylinder
- V2/V3 Aluminum Cylinder Head
- Ball Bearings on Bevel Gear
- Solid Stainless Steel Bushings on Step and Sector Gears
- Selector Plate
- Anti-Reversal Latch
- Zinc Cut-off lever
- M4 Microswitch compatible Trigger
- Microswitch
- Polycarbonate Tappet Plate
- Shims
- Gear Grease (on the gears)
- Tamiya Front-Wired Harness
- Steel Phillips Head Screws w/ washers

product details

Comes with the following parts:

I got one of these because Brill was out of rear wired boxes. I have been using this for a while in a backup build and found myself modifying it a lot. I successfully modified this gearbox to accept a Gate TITAN. This gearbox comes with a microswitch trigger, so non standard screw holes and trigger are installed as well as the absense of a selector window. After heavy dremeling, and epoxying the TITAN to the gearbox wall, I got it to work...lol In addition to those modifications, radiusing and AOE correction were needed. I also found that SHS pinions mesh very well with the bevel gear, as opposed to a ZCI one which made a bit of noise. Stock shimming is done very well. In a 363mm 6.01TBB setup, I was getting about 420fps with the stock spring. Other notes: if you decide to keep the microswitch trigger and wish to install a MOSFET, make sure it supports debouncing.

Fantastically put together, and I LOVE the ability to change the spring and guide quickly without taking the whole thing apart. Bear in mind, however, that the port in the back for the spring guide extends about a half-inch behind where a normal V2 gearbox would end - you may have to modify your receiver to fit this gearbox in.

Categories

Information

ZCI Complete 8mm V2 M4/AR QD Gearbox (front wired) (M-14)

product details

Customer Reviews

Categories

Information

manufacturers